This document specifies the terms and definitions of wedges, including three angle series (120~0"30 ') and one slope series (1∶10~1∶500). This document is applicable to general mechanical engineering.
2 Normative References
There are no normative references in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
three point one
Wedge
The geometry defined by a pair of intersecting planes and a certain dimension. Note 1: Wedge is the dimension key defined by angular dimension.
Note 2: See Figure 1
three point two
Wedge angle3
The wedge angle dimension defined in the plane that is re straight to the wedge edge.
Note: See Figure 1
three point three
Wedge slopes
The ratio of the difference between the heights H and h of two designated wedge sections relative to any wedge plane and the projection distance L between them.
three point four
Wedge ratio
2 times the half angle tangent value of the wedge angle.
three point five
Wedge edge
A line formed by the intersection of wedge planes.
three point six
V-shape
vee-block
Dovetail is a special large angle wedge. Note: See Fig.1 And Fig. 3
4 Wedge series
Table 1 shows the nominal values of wedge angle and wedge slope for general use, the corresponding wedge ratio and the calculated wedge slope. When selecting wedge angle, series 1 shall be preferred, followed by series 2, to reduce the number of tools, gauges and measuring instruments required in the production process of workpieces with wedge characteristics.
Appendix A (Informative) Relationship with GPS Matrix Model
A. 1 General
For complete details of the GPS matrix model, see ISO 14638.
The GPS matrix model in ISO 14638 provides an overview of the GPS system, and this document is a part of this system. Unless otherwise stated, the basic GPS rules given in ISO 8015 are applicable to this document, and the default rules given in ISO 14253-1 are applicable to the specifications developed in accordance with this document.
A. 2. Information about standards and their use
This document covers the definition of wedge parameters and corresponding values for several applications. It should be completed by standards that include element features, measurement, measuring equipment and calibration, so as to obtain a clear understanding.
A. 3 Position in GPS matrix model
This document is a general GPS standard. The rules and principles given in this document apply to all parts of the GPS matrix marked with solid points (•). See Table A.1.
Bibliography
1 Scope 2 Normative References 3 Terms and definitions 4 Wedge series Appendix A (Informative) Relationship with GPS Matrix Model Bibliography
Standard
GB/T 4096.1-2022 Geometrical product specifications (GPS)—Wedges—Part 1:Series of angles and slopes (English Version)
Standard No.
GB/T 4096.1-2022
Status
valid
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
120.0
Implemented on
2022-10-12
Delivery
via email in 1~3 business day
Detail of GB/T 4096.1-2022
Standard No.
GB/T 4096.1-2022
English Name
Geometrical product specifications (GPS)—Wedges—Part 1:Series of angles and slopes
1 Scope
This document specifies the terms and definitions of wedges, including three angle series (120~0"30 ') and one slope series (1∶10~1∶500). This document is applicable to general mechanical engineering.
2 Normative References
There are no normative references in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
three point one
Wedge
The geometry defined by a pair of intersecting planes and a certain dimension. Note 1: Wedge is the dimension key defined by angular dimension.
Note 2: See Figure 1
three point two
Wedge angle3
The wedge angle dimension defined in the plane that is re straight to the wedge edge.
Note: See Figure 1
three point three
Wedge slopes
The ratio of the difference between the heights H and h of two designated wedge sections relative to any wedge plane and the projection distance L between them.
three point four
Wedge ratio
2 times the half angle tangent value of the wedge angle.
three point five
Wedge edge
A line formed by the intersection of wedge planes.
three point six
V-shape
vee-block
Dovetail is a special large angle wedge. Note: See Fig.1 And Fig. 3
4 Wedge series
Table 1 shows the nominal values of wedge angle and wedge slope for general use, the corresponding wedge ratio and the calculated wedge slope. When selecting wedge angle, series 1 shall be preferred, followed by series 2, to reduce the number of tools, gauges and measuring instruments required in the production process of workpieces with wedge characteristics.
Appendix A (Informative) Relationship with GPS Matrix Model
A. 1 General
For complete details of the GPS matrix model, see ISO 14638.
The GPS matrix model in ISO 14638 provides an overview of the GPS system, and this document is a part of this system. Unless otherwise stated, the basic GPS rules given in ISO 8015 are applicable to this document, and the default rules given in ISO 14253-1 are applicable to the specifications developed in accordance with this document.
A. 2. Information about standards and their use
This document covers the definition of wedge parameters and corresponding values for several applications. It should be completed by standards that include element features, measurement, measuring equipment and calibration, so as to obtain a clear understanding.
A. 3 Position in GPS matrix model
This document is a general GPS standard. The rules and principles given in this document apply to all parts of the GPS matrix marked with solid points (•). See Table A.1.
Bibliography
Contents of GB/T 4096.1-2022
1 Scope
2 Normative References
3 Terms and definitions
4 Wedge series
Appendix A (Informative) Relationship with GPS Matrix Model
Bibliography
