Interconnection and interoperation for textile equipment - Part 1: General technology requirements
1 Scope
This document specifies the interconnection and interoperation for textile equipment of spinning, chemical fiber, weaving, knitting, nonwovens and dyeing and finishing equipment, and specifies the basic requirements for interconnection and interoperation for textile equipment from the aspects of textile equipment communication protocol, information security, general information model, data dictionary and mapping rules of information model.
This document is applicable to guide the design and integration of interconnection and interoperation system for textile equipment, as well as the construction of textile intelligent factory.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 36324 Information security technology - Information security classification specifications of industrial control systems
GB/T 39561.1-2020 Interconnection and interoperation of numerical control equipment - Part 1: General technical requirement
GB/T 39561.2-2020 Interconnection and interoperation of numerical control equipment - Part 2: Device description model
GB/T 39561.3-2020 Interconnection and interoperation of numerical control equipment - Part 3: Implementation oriented model mapping
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB 39561.1-2020 and the following apply.
3.1
interconnection
end-to-end data exchange between two equipment through at least one physically compatible connection line, where the communication protocols between the equipment can be compatible and the semantics of each other's information resources can be understood
[Source: GB/T 39561.1-2020, 3.1.3]
3.2
interoperation
information exchange between equipment through the relevant information model, and utilization of information into their own functions to achieve collaborative work
[Source: GB/T 33899-2017, 3.4, modified]
4 Abbreviations
For the purposes of this document, the following abbreviation applies.
DCS: Distributed Control System;
IPC: Industrial Personal Computer;
OPC UA: Open Platform Communication Unified Architecture;
Contents
Foreword I
Introduction II
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Architecture
5.1 System architecture
5.2 Information interconnection
6 Basic requirements
6.1 Communication protocol
6.2 Information security
6.3 General information model
6.4 Data dictionary
6.5 Mapping rules of information model
Annex A (Informative) Typical equipment
A.1 Typical spinning equipment
A.2 Typical chemical fiber equipment
A.3 Typical weaving equipment
A.4 Typical knitting equipment
A.5 Typical nonwovens equipment
A.6 Typical dyeing and finishing equipment
Bibliography
Interconnection and interoperation for textile equipment - Part 1: General technology requirements
1 Scope
This document specifies the interconnection and interoperation for textile equipment of spinning, chemical fiber, weaving, knitting, nonwovens and dyeing and finishing equipment, and specifies the basic requirements for interconnection and interoperation for textile equipment from the aspects of textile equipment communication protocol, information security, general information model, data dictionary and mapping rules of information model.
This document is applicable to guide the design and integration of interconnection and interoperation system for textile equipment, as well as the construction of textile intelligent factory.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 36324 Information security technology - Information security classification specifications of industrial control systems
GB/T 39561.1-2020 Interconnection and interoperation of numerical control equipment - Part 1: General technical requirement
GB/T 39561.2-2020 Interconnection and interoperation of numerical control equipment - Part 2: Device description model
GB/T 39561.3-2020 Interconnection and interoperation of numerical control equipment - Part 3: Implementation oriented model mapping
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB 39561.1-2020 and the following apply.
3.1
interconnection
end-to-end data exchange between two equipment through at least one physically compatible connection line, where the communication protocols between the equipment can be compatible and the semantics of each other's information resources can be understood
[Source: GB/T 39561.1-2020, 3.1.3]
3.2
interoperation
information exchange between equipment through the relevant information model, and utilization of information into their own functions to achieve collaborative work
[Source: GB/T 33899-2017, 3.4, modified]
4 Abbreviations
For the purposes of this document, the following abbreviation applies.
DCS: Distributed Control System;
IPC: Industrial Personal Computer;
OPC UA: Open Platform Communication Unified Architecture;
Contents of GB/T 43018.1-2023
Contents
Foreword I
Introduction II
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Architecture
5.1 System architecture
5.2 Information interconnection
6 Basic requirements
6.1 Communication protocol
6.2 Information security
6.3 General information model
6.4 Data dictionary
6.5 Mapping rules of information model
Annex A (Informative) Typical equipment
A.1 Typical spinning equipment
A.2 Typical chemical fiber equipment
A.3 Typical weaving equipment
A.4 Typical knitting equipment
A.5 Typical nonwovens equipment
A.6 Typical dyeing and finishing equipment
Bibliography
