GB/T 43880.1-2024 Service-oriented manufacturing - Guideline - Part 1: System architecture
1 Scope
This document specifies the technical framework, the logic structure of the standard system and the standard system framework for service-oriented manufacturing.
This document is applicable to the standardization construction of service-oriented manufacturing by government authorities, enterprises and institutions, research institutes and relevant organizations related to service-oriented manufacturing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 13016 Principles and requirements for constructing standard system
GB/T 43879-2024 Service-oriented manufacturing - General terminology
JB/T 12516 Modern manufacturing service - Equipment manufacturing industry - Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 13016, GB/T 43879-2024 and JB/T 12516 apply.
4 Technical architecture of service-oriented manufacturing
4.1 General
From the perspective of a service-oriented manufacturing enterprise, the basic logical structure of the technical reference model of service-oriented manufacturing is determined by sorting out the characteristics of service-oriented manufacturing and the key elements involved, and combining the needs of the fields and application scenarios involved in service-oriented manufacturing.
4.2 Technical reference model
The technical reference model of service-oriented manufacturing is divided into manufacturing resource layer, supporting technology layer, core service layer, industry application layer, and demand target layer according to the layered design principle of information system. The technical reference model shall be progressive from the bottom up, layer by layer, as shown in Figure 1.
Foreword i Introduction ii 1 Scope 2 Normative references 3 Terms and definitions 4 Technical architecture of service-oriented manufacturing 5 Logical structure of service-oriented manufacturing standard system 6 Framework of service-oriented manufacturing standard system Bibliography
GB/T 43880.1-2024 Service-oriented manufacturing - Guideline - Part 1: System architecture
1 Scope
This document specifies the technical framework, the logic structure of the standard system and the standard system framework for service-oriented manufacturing.
This document is applicable to the standardization construction of service-oriented manufacturing by government authorities, enterprises and institutions, research institutes and relevant organizations related to service-oriented manufacturing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 13016 Principles and requirements for constructing standard system
GB/T 43879-2024 Service-oriented manufacturing - General terminology
JB/T 12516 Modern manufacturing service - Equipment manufacturing industry - Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 13016, GB/T 43879-2024 and JB/T 12516 apply.
4 Technical architecture of service-oriented manufacturing
4.1 General
From the perspective of a service-oriented manufacturing enterprise, the basic logical structure of the technical reference model of service-oriented manufacturing is determined by sorting out the characteristics of service-oriented manufacturing and the key elements involved, and combining the needs of the fields and application scenarios involved in service-oriented manufacturing.
4.2 Technical reference model
The technical reference model of service-oriented manufacturing is divided into manufacturing resource layer, supporting technology layer, core service layer, industry application layer, and demand target layer according to the layered design principle of information system. The technical reference model shall be progressive from the bottom up, layer by layer, as shown in Figure 1.
Contents of GB/T 43880.1-2024
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 Technical architecture of service-oriented manufacturing
5 Logical structure of service-oriented manufacturing standard system
6 Framework of service-oriented manufacturing standard system
Bibliography
