This document specifies the terms and definitions, abbreviations, requirements and connection framework, network architecture, network implementation and network security requirements of interconnection network for tires intelligent manufacturing.
This document is applicable to the design, construction and upgrade of interconnection network architecture for tire intelligent manufacturing enterprises.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 22239-2019 Information security technology - Baseline for classified protection of information system security;
GB 40050-2021 Critical network devices security common requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
network architecture
overall design of a communication system that provides standards for network hardware, software, protocols, access control, and topology
3.2
field level
the lowest part of the decentralized control system, it is also the most basic level
Note: It includes production equipment, instrumentation, etc.
3.3
workshop level
relative functionally independent unit in the production process
Note: In the tire industry mainly refers to rubber mixing workshop, semi-product workshop, molding workshop, vulcanization workshop, testing workshop, etc., each production enterprise will be different according to the actual situation.
3.4
plant level
the whole factory of tire enterprise
Note: It includes design, production, logistics, management and other links.
3.5
network topology
physical layout of various devices interconnected by the transmission medium, which constitutes a specific physical, that is, real, or logical, that is, virtual arrangement among the members of the network
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
AGV: Automated Guided Vehicle
API: Application Programming Interface
CC-Link: Control &Communication Link
CRM: Customer Relationship Management
DCS: Distributed Control System
ERP: Enterprise Resource Planning
FCS: Fieldbus Control System
HMI: Human Machine Interface
IPv4: Internet Protocol Version 4
IPv6: Internet Protocol Version 6
IT: Information Technology
K8s: Kubernetes
MES: Manufacturing Execution System
MODBUS RTU: Modbus Protocol Remote Terminal Unit
Modbus: Modbus Protocol
MPLS: Multi-Protocol Label Switching
MQ: Message Queuing
MQTT: Message Queuing Telemetry Transport
NB-IoT: Narrow Band Internet of Things
Netconf: Network Configuration Protocol
OA: Office Automation
OPC: OLE for Process Control
OPC UA: OLE for Process Control Unified Architecture
OT: Operational Technology
PLC: Programmable Logic Controller
PLM: Product Lifecycle Management
PON: Passive Optical Network
RFID: Radio Frequency Identification
SCADA: Supervisory Control And Data Acquisition
SCM: Supply Chain Management
SDN: Software Defined Network
SD-Wan: Software-Defined WAN
SNMP: Simple Network Management Protocol
SRM: Supplier Relationship Management
Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Abbreviations 5 Tire factory interconnection network requirements and connection framework 5.1 Overall requirements for tire factory interconnection network 5.2 Interconnection network connection framework for tires intelligent manufacturing 6 Interconnection network architecture for tires intelligent manufacturing 6.1 Classification of tire factory interconnection network architecture 6.2 Target architecture 6.3 Topology 6.4 Functional requirements 7 Implementation of interconnection network for tires intelligent manufacturing 7.1 Implementation framework 7.2 Implementation of edge access network 7.3 Implementation of production control network 7.4 Implementation of backbone network of tire factory 7.5 Implementation of data communication system 8 Interconnection network security for tires intelligent manufacturing 8.1 Requirements for device security protection 8.2 Requirements for network security protection 8.3 Requirements for device access control security 8.4 Requirements for data security
GB/T 45132-2025 Tires intelligent manufacturing — Interconnection network architecture — General specification
1 Scope
This document specifies the terms and definitions, abbreviations, requirements and connection framework, network architecture, network implementation and network security requirements of interconnection network for tires intelligent manufacturing.
This document is applicable to the design, construction and upgrade of interconnection network architecture for tire intelligent manufacturing enterprises.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 22239-2019 Information security technology - Baseline for classified protection of information system security;
GB 40050-2021 Critical network devices security common requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
network architecture
overall design of a communication system that provides standards for network hardware, software, protocols, access control, and topology
3.2
field level
the lowest part of the decentralized control system, it is also the most basic level
Note: It includes production equipment, instrumentation, etc.
3.3
workshop level
relative functionally independent unit in the production process
Note: In the tire industry mainly refers to rubber mixing workshop, semi-product workshop, molding workshop, vulcanization workshop, testing workshop, etc., each production enterprise will be different according to the actual situation.
3.4
plant level
the whole factory of tire enterprise
Note: It includes design, production, logistics, management and other links.
3.5
network topology
physical layout of various devices interconnected by the transmission medium, which constitutes a specific physical, that is, real, or logical, that is, virtual arrangement among the members of the network
4 Abbreviations
For the purposes of this document, the following abbreviations apply.
AGV: Automated Guided Vehicle
API: Application Programming Interface
CC-Link: Control &Communication Link
CRM: Customer Relationship Management
DCS: Distributed Control System
ERP: Enterprise Resource Planning
FCS: Fieldbus Control System
HMI: Human Machine Interface
IPv4: Internet Protocol Version 4
IPv6: Internet Protocol Version 6
IT: Information Technology
K8s: Kubernetes
MES: Manufacturing Execution System
MODBUS RTU: Modbus Protocol Remote Terminal Unit
Modbus: Modbus Protocol
MPLS: Multi-Protocol Label Switching
MQ: Message Queuing
MQTT: Message Queuing Telemetry Transport
NB-IoT: Narrow Band Internet of Things
Netconf: Network Configuration Protocol
OA: Office Automation
OPC: OLE for Process Control
OPC UA: OLE for Process Control Unified Architecture
OT: Operational Technology
PLC: Programmable Logic Controller
PLM: Product Lifecycle Management
PON: Passive Optical Network
RFID: Radio Frequency Identification
SCADA: Supervisory Control And Data Acquisition
SCM: Supply Chain Management
SDN: Software Defined Network
SD-Wan: Software-Defined WAN
SNMP: Simple Network Management Protocol
SRM: Supplier Relationship Management
Contents of GB/T 45132-2025
Contents
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Tire factory interconnection network requirements and connection framework
5.1 Overall requirements for tire factory interconnection network
5.2 Interconnection network connection framework for tires intelligent manufacturing
6 Interconnection network architecture for tires intelligent manufacturing
6.1 Classification of tire factory interconnection network architecture
6.2 Target architecture
6.3 Topology
6.4 Functional requirements
7 Implementation of interconnection network for tires intelligent manufacturing
7.1 Implementation framework
7.2 Implementation of edge access network
7.3 Implementation of production control network
7.4 Implementation of backbone network of tire factory
7.5 Implementation of data communication system
8 Interconnection network security for tires intelligent manufacturing
8.1 Requirements for device security protection
8.2 Requirements for network security protection
8.3 Requirements for device access control security
8.4 Requirements for data security
