1 Scope
This Part specifies the method for determination of moisture in gases by determination of dew point.
This Part is applicable to the determination of moisture in hydrogen, oxygen, nitrogen, helium, neon, argon, krypton, xenon, nitrous oxide, sulphur hexafluoride, etc., as well as mixture gas of such gases. This Part is not applicable to the gases which are condensate before moisture condensation , and which may react with moisture.
This Part is applicable to the determination of gas dew point within 0 ℃ to -120 ℃.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3723 Sampling of chemical products for industrial use — Safety in sampling (GB/T 3723-1999, idt ISO 3165:1976)
GB/T 5832.1 Determination of moisture in gases — Part 1: Electrolytic method
GB/T 6681 General rules for sampling gaseous chemical products
3 Terms and Definitions
For the purposes of this Part, the following terms and definitions apply.
1 Scope
This Part specifies the method for determination of moisture in gases by determination of dew point.
This Part is applicable to the determination of moisture in hydrogen, oxygen, nitrogen, helium, neon, argon, krypton, xenon, nitrous oxide, sulphur hexafluoride, etc., as well as mixture gas of such gases. This Part is not applicable to the gases which are condensate before moisture condensation , and which may react with moisture.
This Part is applicable to the determination of gas dew point within 0 ℃ to -120 ℃.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3723 Sampling of chemical products for industrial use — Safety in sampling (GB/T 3723-1999, idt ISO 3165:1976)
GB/T 5832.1 Determination of moisture in gases — Part 1: Electrolytic method
GB/T 6681 General rules for sampling gaseous chemical products
3 Terms and Definitions
For the purposes of this Part, the following terms and definitions apply.