1 Scope
This standard specifies the boundary dimensions of the self-aligning thrust roller bearings of which the boundary dimensions meet GB/T 273.2-2006.
This standard is applicable to spherical roller type single-direction self-aligning thrust roller bearings and is used for the bearing manufacturer's design and the customer's type selection.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 273.2-2006 Rolling Bearings - Thrust Bearings - Boundary Dimensions, General Plan (ISO 104: 2002, IDT)
GB/T 274-2000 Rolling Bearings - Chamfer Dimension - Maximum Values (idt ISO 582: 1995)
GB/T 7811-2007 Rolling Bearings - Symbols for Quantities (S0 15241: 2001, IDT)
3 Symbols (See Figure 1)
Contents
Foreword I
1 Scope
2 Normative References
3 Symbols
4 Boundary Dimensions
5 Designation Example
1 Scope
This standard specifies the boundary dimensions of the self-aligning thrust roller bearings of which the boundary dimensions meet GB/T 273.2-2006.
This standard is applicable to spherical roller type single-direction self-aligning thrust roller bearings and is used for the bearing manufacturer's design and the customer's type selection.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
GB/T 273.2-2006 Rolling Bearings - Thrust Bearings - Boundary Dimensions, General Plan (ISO 104: 2002, IDT)
GB/T 274-2000 Rolling Bearings - Chamfer Dimension - Maximum Values (idt ISO 582: 1995)
GB/T 7811-2007 Rolling Bearings - Symbols for Quantities (S0 15241: 2001, IDT)
3 Symbols (See Figure 1)
Contents of GB/T 5859-2008
Contents
Foreword I
1 Scope
2 Normative References
3 Symbols
4 Boundary Dimensions
5 Designation Example