This standard specified the classification, requirement, test methods, test rules, mark, packing, transportation and stockpile of the unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows.
This standard is applicable to the unplasticized polyvinyl chloride profile whose color scope is in L•≥82, -2.5.≤a•≤5, -5≤b•≤15.
Foreword 1 Scope 2. Normative Quoted Documents 3. Terms and Definitions 4 Classifications 4.1 Classification of Ageing Time 4.2 Classification of Drop Hammer Impact of Main Profile 4.3 Wall Thickness Classification of Main Profile 4.4 Product Marking 5 Requirements 5.1 Material Property 5.2 Appearance 5.3 Dimension and Deviation 5.4 Deviation from Straightness of Profile 5.5 Mass of Main Profile 5.6 Rate of Dimensional Change after Heating 5.7 Drop Hammer Impact of Main Profile 5.8 State after Heating in 150℃ 5.9 Aging 5.10 Solderability of Main Profile 6 Test Method 6.1 State Adjustment and Test Environment 6.2 Appearance 6.3 Dimension and Deviation 6.4 Deviation from Straightness 6.5 Mass of Main Profile 6.6 Rate of Dimensional Change after Heating 6.7 Drop Hammer Impact of Main Profile 6.8 State after Heating in 150℃ 6.9 Ageing Test Method 6.10 Solderability main Profile 7 Test Rules 7.1 Test Classification 7.2 Group and Sample 7.3 Decision Rule 8 Marks 8.1 Marks 8.2 Permanent Marking of a Main Profile 9 Packing, Transportation and Storage 9.1 External Packing 9.2 Transportation 9.3 Storage Annex A Annex B Annex C C.1 Scope C.2 Specimen Preparation C.3 Material Property No.1 revision list for GB/T 8814-2004 "Unplasticized Polyvinyl Chloride (PVC - U) Profiles for the Doors and Windows"
This standard specified the classification, requirement, test methods, test rules, mark, packing, transportation and stockpile of the unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows.
This standard is applicable to the unplasticized polyvinyl chloride profile whose color scope is in L•≥82, -2.5.≤a•≤5, -5≤b•≤15.
Contents of GB/T 8814-2004
Foreword
1 Scope
2. Normative Quoted Documents
3. Terms and Definitions
4 Classifications
4.1 Classification of Ageing Time
4.2 Classification of Drop Hammer Impact of Main Profile
4.3 Wall Thickness Classification of Main Profile
4.4 Product Marking
5 Requirements
5.1 Material Property
5.2 Appearance
5.3 Dimension and Deviation
5.4 Deviation from Straightness of Profile
5.5 Mass of Main Profile
5.6 Rate of Dimensional Change after Heating
5.7 Drop Hammer Impact of Main Profile
5.8 State after Heating in 150℃
5.9 Aging
5.10 Solderability of Main Profile
6 Test Method
6.1 State Adjustment and Test Environment
6.2 Appearance
6.3 Dimension and Deviation
6.4 Deviation from Straightness
6.5 Mass of Main Profile
6.6 Rate of Dimensional Change after Heating
6.7 Drop Hammer Impact of Main Profile
6.8 State after Heating in 150℃
6.9 Ageing Test Method
6.10 Solderability main Profile
7 Test Rules
7.1 Test Classification
7.2 Group and Sample
7.3 Decision Rule
8 Marks
8.1 Marks
8.2 Permanent Marking of a Main Profile
9 Packing, Transportation and Storage
9.1 External Packing
9.2 Transportation
9.3 Storage
Annex A
Annex B
Annex C
C.1 Scope
C.2 Specimen Preparation
C.3 Material Property
No.1 revision list for GB/T 8814-2004 "Unplasticized Polyvinyl Chloride (PVC - U) Profiles for the Doors and Windows"
