Commission of Science, Technology and Industry for National Defense
Issued on:
1991-01-26
Implemented on:
1991-6-1
Status:
valid
Language:
English
File Format:
PDF
Word Count:
1000 words
Price(USD):
50.00
Delivery:
via email in 1 business day
Codeofchina Inc. is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
Test method of phenolic resin for ablative materials - Test of viscosity
This standard refers to the international standard ISO 3219-1977 (E) Plastics -- Polymers in the liquid, emulsified or dispersed state - Determination of viscosity with a rotational viscometer working at defined shear rate.
1 Subject content and applicable scope
This standard specifies the method of testing the viscosity of phenolic resin with rotational viscometer.
It is applicable to the determination of viscosity of phenolic resin for ablative materials. It may be used as a reference for other alcohol-soluble phenolic resins.
2 Normative references
GJB 1059.1 Test method of phenolic resin for ablative materials - Test of solid content
3 Method summary
The viscosity of phenolic resin is determined with a specified rotational viscometer under the specified conditions (temperature and concentration).
4 Reagents
Ethanol: Grade I industrial ethanol.
5 Apparatus
5.1 Rotational viscometer: rotating cylinder type or rotor type, which shall have a determination vessel connected with thermostatic water bath.
5.2 Thermostatic water bath: with a temperature control accuracy of ±0.5℃.
5.3 Thermometer: with a measuring range of 0℃~50℃, and a division value of 0.2℃.
5.4 Balance: with a sensibility of 0.1g.
1 Subject content and applicable scope 2 Normative references 3 Method summary 4 Reagents 5 Apparatus 6 Test piece 7 Test procedures 8 Expression of results 9 Test report Additional explanation
Codeofchina Inc. is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
Test method of phenolic resin for ablative materials - Test of viscosity
This standard refers to the international standard ISO 3219-1977 (E) Plastics -- Polymers in the liquid, emulsified or dispersed state - Determination of viscosity with a rotational viscometer working at defined shear rate.
1 Subject content and applicable scope
This standard specifies the method of testing the viscosity of phenolic resin with rotational viscometer.
It is applicable to the determination of viscosity of phenolic resin for ablative materials. It may be used as a reference for other alcohol-soluble phenolic resins.
2 Normative references
GJB 1059.1 Test method of phenolic resin for ablative materials - Test of solid content
3 Method summary
The viscosity of phenolic resin is determined with a specified rotational viscometer under the specified conditions (temperature and concentration).
4 Reagents
Ethanol: Grade I industrial ethanol.
5 Apparatus
5.1 Rotational viscometer: rotating cylinder type or rotor type, which shall have a determination vessel connected with thermostatic water bath.
5.2 Thermostatic water bath: with a temperature control accuracy of ±0.5℃.
5.3 Thermometer: with a measuring range of 0℃~50℃, and a division value of 0.2℃.
5.4 Balance: with a sensibility of 0.1g.
Contents of GJB 1059.2-1990
1 Subject content and applicable scope
2 Normative references
3 Method summary
4 Reagents
5 Apparatus
6 Test piece
7 Test procedures
8 Expression of results
9 Test report
Additional explanation
