1 Scope
This standard specifies the test rule, marking, packaging, transport, storage for rubber shoes.
This standard is applicable to rubber shoes (boots), rubber and plastic shoes.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB 191-2000 Packaging - Pictorial marking for handling of goods(eqv ISO 780:1997)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes-Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection(idt ISO 2859-1:1999)
GB/T 10111-1988 Methods for random sampling by utilizing dices of random number
GB/T 3293.1-1998 Shoes sizes(idt ISO 9407:1991)
3 Test Rules
3.1 Ex-factory test
3.1.1 Inspection lot and batch
3.1.1.1 Inspection lot generally consists of unit products with the same variety, raw material, formulation and production conditions.
3.1.1.2 The batch of each inspection lot of every kind of product shall meet the requirements specified in Table 1.
1 Scope
This standard specifies the test rule, marking, packaging, transport, storage for rubber shoes.
This standard is applicable to rubber shoes (boots), rubber and plastic shoes.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB 191-2000 Packaging - Pictorial marking for handling of goods(eqv ISO 780:1997)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes-Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection(idt ISO 2859-1:1999)
GB/T 10111-1988 Methods for random sampling by utilizing dices of random number
GB/T 3293.1-1998 Shoes sizes(idt ISO 9407:1991)
3 Test Rules
3.1 Ex-factory test
3.1.1 Inspection lot and batch
3.1.1.1 Inspection lot generally consists of unit products with the same variety, raw material, formulation and production conditions.
3.1.1.2 The batch of each inspection lot of every kind of product shall meet the requirements specified in Table 1.
