This standard specifies the methods of Latex foam-Determination of apparent density.
This standard is applicable to the determination of apparent density of foam products mainly made of natural latex and synthetic latex.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
HG/T 3054 Latex foam-Determination of liner dimensions
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
apparent density
mass of latex foam per unit volume under specified temperature and humidity
4 Test apparatus and materials
4.1 Balance
The precision of balance is less than 0.1% of the specimen mass.
4.2 Measuring tools
It shall meet the requirements of HG/T 3054.
4.3 Linseed
Pure linseed with full grains and without moth, caked or other foreign matters.
4.4 Glass jar
A cylindrical transparent glass jar with a diameter of 25 cm~30 cm and a height of 15 cm~20 cm may be marked with scales (in mm) or without scales.
4.5 Foam cutter
The latex foam cutter, which does not make the specimen deformation and damage the specimen foam structure and with a flat cutting surface, shall be used.
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Test apparatus and materials 5 Classification of samples 6 Preparation of specimen 7 Test methods 8 Expression of results 9 Test report
Latex foam-Determination of apparent density
1 Scope
This standard specifies the methods of Latex foam-Determination of apparent density.
This standard is applicable to the determination of apparent density of foam products mainly made of natural latex and synthetic latex.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
HG/T 3054 Latex foam-Determination of liner dimensions
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
apparent density
mass of latex foam per unit volume under specified temperature and humidity
4 Test apparatus and materials
4.1 Balance
The precision of balance is less than 0.1% of the specimen mass.
4.2 Measuring tools
It shall meet the requirements of HG/T 3054.
4.3 Linseed
Pure linseed with full grains and without moth, caked or other foreign matters.
4.4 Glass jar
A cylindrical transparent glass jar with a diameter of 25 cm~30 cm and a height of 15 cm~20 cm may be marked with scales (in mm) or without scales.
4.5 Foam cutter
The latex foam cutter, which does not make the specimen deformation and damage the specimen foam structure and with a flat cutting surface, shall be used.
Contents of HG/T 3055-2012
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Test apparatus and materials
5 Classification of samples
6 Preparation of specimen
7 Test methods
8 Expression of results
9 Test report
