This standard specifies the expression method for model designation, model codes, driving mode codes, connection type codes, structure type codes, sealing material codes, valve body material codes and pressure codes of general purpose valves.
This standard is applicable to the model designation of general purpose gate valves, stop valves, butterfly valves, ball valves, diaphragm valves, plug valves, check valves, safety valves, pressure relief valves, automatic steam traps, drainage valves and plunger valves.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1048 Nominal pressures and test pressures for pipes and pipe line accessories
Foreword II 1 Scope 2 Normative References 3 Model Designation and Code Expression Methods 3.1 Valves model designation method 3.2 Valves type code 3.3 Driving mode code 3.4 Connection type code 3.5 Valve structure type code 3.6 Code of sealing surface or lining materials 3.7 Pressure code 3.8 Material code of valve body 3.9 Designation 3.10 Examples of model designation method Table 1 Valves Type Code Table 2 Code Expression of Valves with Other Function or Other Special Structure Table 3 Valves Driving Mode Code Table 4 Connection Type Code of Valves Attachment End Table 5 Structure Type Code of Gate Valves Table 6 Structure Type Code of Stop Valve, Throttle Valve and Plunger Valves Table 7 Structure Type Code of Ball Valves Table 8 Structure Type Code of Butterfly Valves Table 9 Structure Type Code of Diaphragm Valves Table 10 Structure Type Code of Plug Valves Table 11 Structure Type Code of Check Valves Table 12 Structure Type Code of Safety Valves Table 13 Structure Type Code of Pressure Relief Valves Table 14 Structure Type Code of Automatic Steam Traps Table 15 Structure Type Code of Drainage Valves Table 16 Code of Sealing Surface or Lining Materials Table 17 Material Code of Valve Body
1 Scope
This standard specifies the expression method for model designation, model codes, driving mode codes, connection type codes, structure type codes, sealing material codes, valve body material codes and pressure codes of general purpose valves.
This standard is applicable to the model designation of general purpose gate valves, stop valves, butterfly valves, ball valves, diaphragm valves, plug valves, check valves, safety valves, pressure relief valves, automatic steam traps, drainage valves and plunger valves.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1048 Nominal pressures and test pressures for pipes and pipe line accessories
Contents of JB/T 308-2004
Foreword II
1 Scope
2 Normative References
3 Model Designation and Code Expression Methods
3.1 Valves model designation method
3.2 Valves type code
3.3 Driving mode code
3.4 Connection type code
3.5 Valve structure type code
3.6 Code of sealing surface or lining materials
3.7 Pressure code
3.8 Material code of valve body
3.9 Designation
3.10 Examples of model designation method
Table 1 Valves Type Code
Table 2 Code Expression of Valves with Other Function or Other Special Structure
Table 3 Valves Driving Mode Code
Table 4 Connection Type Code of Valves Attachment End
Table 5 Structure Type Code of Gate Valves
Table 6 Structure Type Code of Stop Valve, Throttle Valve and Plunger Valves
Table 7 Structure Type Code of Ball Valves
Table 8 Structure Type Code of Butterfly Valves
Table 9 Structure Type Code of Diaphragm Valves
Table 10 Structure Type Code of Plug Valves
Table 11 Structure Type Code of Check Valves
Table 12 Structure Type Code of Safety Valves
Table 13 Structure Type Code of Pressure Relief Valves
Table 14 Structure Type Code of Automatic Steam Traps
Table 15 Structure Type Code of Drainage Valves
Table 16 Code of Sealing Surface or Lining Materials
Table 17 Material Code of Valve Body
