This part of JB/T 6758 specifies the general requirements of less paper insulated netting-typed continuously transposed conductors of polyvinyl acetal enamelled copper wires. The transposed conductors adopt Level 120 adhesive polyvinyl acetal enamelled rectangular copper wire (thermosetting epoxy resin self-adhesive layer), and adopt binding with polyester fiber rope for the netting-typed and wrapping with polyester fiber non-woven tape, epoxy resin glass fiber cotton tape or insulation paper tape with hole pattern for the apposition-typed. The copper conductors may be either common annealed copper wires or half-hard copper wires.
This part shall be used together with JB/T 6758.1.
Foreword I 1 Scope 2 Normative References 3 Terms and Definitions, Code and Product Representation Method 4 Model 5 Size 6 Technical Requirements, Test Methods and Inspection Rules 6.1 Dimension and Structure 6.2 Technical Requirements and Test Methods 6.3 Inspection Rules
This part of JB/T 6758 specifies the general requirements of less paper insulated netting-typed continuously transposed conductors of polyvinyl acetal enamelled copper wires. The transposed conductors adopt Level 120 adhesive polyvinyl acetal enamelled rectangular copper wire (thermosetting epoxy resin self-adhesive layer), and adopt binding with polyester fiber rope for the netting-typed and wrapping with polyester fiber non-woven tape, epoxy resin glass fiber cotton tape or insulation paper tape with hole pattern for the apposition-typed. The copper conductors may be either common annealed copper wires or half-hard copper wires.
This part shall be used together with JB/T 6758.1.
Contents of JB/T 6758.3-2007
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions, Code and Product Representation Method
4 Model
5 Size
6 Technical Requirements, Test Methods and Inspection Rules
6.1 Dimension and Structure
6.2 Technical Requirements and Test Methods
6.3 Inspection Rules
