1 Scope
This standard specifies the calculation method of the static load ratings for spherical plain bearings.
This standard is applicable to radial spherical plain bearings, angular contact spherical plain bearings, thrust spherical plain bearings and rod end spherical plain bearings whose size ranges are in accordance with GB/T 9161, GB/T 9162, GB/T 9163 and GB/T 9164, and technical conditions are in accordance with those specified in relevant standards.
This standard is not applicable to spherical plain bearings for special structures or working under abnormal service conditions, such as special materials, special sliding contact surface, special clearance, inner and outer rings with relatively oversize inclination, shaft or housing with oversize deformation.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents applies. For undated references, the latest editions apply.
1 Scope
This standard specifies the calculation method of the static load ratings for spherical plain bearings.
This standard is applicable to radial spherical plain bearings, angular contact spherical plain bearings, thrust spherical plain bearings and rod end spherical plain bearings whose size ranges are in accordance with GB/T 9161, GB/T 9162, GB/T 9163 and GB/T 9164, and technical conditions are in accordance with those specified in relevant standards.
This standard is not applicable to spherical plain bearings for special structures or working under abnormal service conditions, such as special materials, special sliding contact surface, special clearance, inner and outer rings with relatively oversize inclination, shaft or housing with oversize deformation.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents applies. For undated references, the latest editions apply.