This standard specifies the terms and definitions, product designation, product specifications and types of weave, requirements, test methods, inspection rules, and marking, packaging, transportation and storage of E-glass fiber fabrics.
This standard is applicable to the fabrics woven from continuous E-glass fiber yarn, including gray fabric, desized fabric and post-finished fabric.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 1449 Fibre-reinforced plastic composites - Determination of flexural properties
GB/T 1549 Chemical analysis methods of glass, glass marble and vitreous fiber
GB/T 4202 Designation for glass fibres
GB/T 7689.2 Reinforcements - Test method for woven fabrics - Part 2: Determination of number of yarns per unit length of warp and weft
GB/T 7689.3 Reinforcements - Test method for woven fabrics - Part 3: Determination of width and length
GB/T 7689.5 Reinforcements - Test method for woven fabrics - Part 5: Determination of glass fibre tensile breaking force and elongation at break
GB/T 9914.1 Test method for reinforcement products - Part 1: Determination of moisture content
GB/T 9914.2 Test method for reinforcement products - Part 2: Determination of combustible-matter content for glass fibre
GB/T 9914.3 The method for reinforcement products - Part 3: Determination of mass per unit area
GB/T 18374 Vocabulary - Terms for reinforcements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18374 apply.
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Product designations 5 Product specifications and types of weave 6 Requirements 7 Test methods 8 Inspection rules 9 Marking, packaging, transport and storage Annex A (Normative) Thickness determination of E-glass fiber fabrics Annex B (Normative) Determination of conductivity of water extract of E-glass fiber fabrics
1 Scope
This standard specifies the terms and definitions, product designation, product specifications and types of weave, requirements, test methods, inspection rules, and marking, packaging, transportation and storage of E-glass fiber fabrics.
This standard is applicable to the fabrics woven from continuous E-glass fiber yarn, including gray fabric, desized fabric and post-finished fabric.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 1449 Fibre-reinforced plastic composites - Determination of flexural properties
GB/T 1549 Chemical analysis methods of glass, glass marble and vitreous fiber
GB/T 4202 Designation for glass fibres
GB/T 7689.2 Reinforcements - Test method for woven fabrics - Part 2: Determination of number of yarns per unit length of warp and weft
GB/T 7689.3 Reinforcements - Test method for woven fabrics - Part 3: Determination of width and length
GB/T 7689.5 Reinforcements - Test method for woven fabrics - Part 5: Determination of glass fibre tensile breaking force and elongation at break
GB/T 9914.1 Test method for reinforcement products - Part 1: Determination of moisture content
GB/T 9914.2 Test method for reinforcement products - Part 2: Determination of combustible-matter content for glass fibre
GB/T 9914.3 The method for reinforcement products - Part 3: Determination of mass per unit area
GB/T 18374 Vocabulary - Terms for reinforcements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18374 apply.
Contents of JC/T 170-2012
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Product designations
5 Product specifications and types of weave
6 Requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transport and storage
Annex A (Normative) Thickness determination of E-glass fiber fabrics
Annex B (Normative) Determination of conductivity of water extract of E-glass fiber fabrics
