1 Scope
This standard specifies the product structure, specifications and marks, general requirements, requirements, test methods and inspection rules, as well as marking, packaging, transport, storage and delivery certificates of steel-glass fiber reinforced plastic double-layer buried oil tanks.
This standard is applicable to double-layer buried oil tanks (hereinafter referred to as S/F double-layer oil tanks) which take steel as the inner shell and glass fiber reinforced plastic (formed by spraying technology) as the outer shell, for which a leak detector is installed in the gap formed between the inner shell and the outer shell, and which store gasoline, ethanol gasoline, diesel oil, aviation kerosene and aviation gasoline under normal pressure, with a filling factor of 0.9.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 150.2 Pressure Vessels - Part 2: Materials
GB 150.3 Pressure vessels - Part 3: Design
GB 150.4 Pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance
GB/T 1447 Fiber-reinforced plastics composites - Determination of tensile properties
GB/T 1449 Fibre-reinforced plastic composites - Determination of flexural properties
GB/T 2576 Test method for insoluble matter content of resin used in fiber reinforced plastics
GB/T 2577 Test method for resin content of glass fiber reinforced plastics
GB/T 3854 Test method for hardness of reinforced plastics by means of a Barcol impresser
GB/T 8237 Liquid unsaturated polyester resin for fiber reinforced plastics
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 17470 Glass fiber mats - Chopped strand and continuous filament mats
GB/T 18369 Glass fiber roving
GB 50727 Code for acceptance of construction quality of anticorrosive engineering of industrial equipment and pipeline
3 Product structure, specifications and marks
3.1 Product structure
The schematic diagram of S/F double-layer oil tank is as shown in Figure 1.
Foreword i
1 Scope
2 Normative references
3 Product structure, specifications and marks
4 General requirements
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport, storage and delivery certificates
1 Scope
This standard specifies the product structure, specifications and marks, general requirements, requirements, test methods and inspection rules, as well as marking, packaging, transport, storage and delivery certificates of steel-glass fiber reinforced plastic double-layer buried oil tanks.
This standard is applicable to double-layer buried oil tanks (hereinafter referred to as S/F double-layer oil tanks) which take steel as the inner shell and glass fiber reinforced plastic (formed by spraying technology) as the outer shell, for which a leak detector is installed in the gap formed between the inner shell and the outer shell, and which store gasoline, ethanol gasoline, diesel oil, aviation kerosene and aviation gasoline under normal pressure, with a filling factor of 0.9.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 150.2 Pressure Vessels - Part 2: Materials
GB 150.3 Pressure vessels - Part 3: Design
GB 150.4 Pressure vessels - Part 4: Fabrication, inspection and testing, and acceptance
GB/T 1447 Fiber-reinforced plastics composites - Determination of tensile properties
GB/T 1449 Fibre-reinforced plastic composites - Determination of flexural properties
GB/T 2576 Test method for insoluble matter content of resin used in fiber reinforced plastics
GB/T 2577 Test method for resin content of glass fiber reinforced plastics
GB/T 3854 Test method for hardness of reinforced plastics by means of a Barcol impresser
GB/T 8237 Liquid unsaturated polyester resin for fiber reinforced plastics
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 17470 Glass fiber mats - Chopped strand and continuous filament mats
GB/T 18369 Glass fiber roving
GB 50727 Code for acceptance of construction quality of anticorrosive engineering of industrial equipment and pipeline
3 Product structure, specifications and marks
3.1 Product structure
The schematic diagram of S/F double-layer oil tank is as shown in Figure 1.
Contents of JC/T 2286-2014
Foreword i
1 Scope
2 Normative references
3 Product structure, specifications and marks
4 General requirements
5 Requirements
6 Test methods
7 Inspection rules
8 Marking, packaging, transport, storage and delivery certificates
