This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, and marking, labeling, packaging and transportation for plywood for solid wood composite flooring.
This standard is applicable to plywood for solid wood composite flooring, which is made by veneer assembly and gluing
2 Normative references
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrections), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition applies.
GB/T 9846.2-2004 Plywood - Part 2: Tolerances on dimension
GB/T 9846.3-2004 Plywood - Part 3: General specification for plywood for general use
GB/T 9846.4-2004 Plywood - Part 4: Specification for classification by appearance of plywood for general use
GB/T 9846.5-2004 Plywood - Part 5: Inspection codes of plywood for general use
GB/T 9846.6-2004 Plywood - Part 6: Marking, tag, packaging of plywood for general use
GB/T 17657-1999 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 18103-2000 Parquet
GB/T 19367.1-2003 Wood-based panels - Determination of thickness, width and length of boards
GB/T 19367.2-2003 Wood-based panels - Determination of squareness and straightness of boards
3 Terms and definitions
For the purposes of this standard, the following term and definition apply.
3.1
plywood for solid wood composite flooring
plywood for solid wood composite flooring, made by veneer assembly and gluing
Foreword II 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Requirements 6 Inspection methods 7 Inspection rules 8 Identification, packaging, transportation and storage
Plywood for solid wood composite flooring
1 Scope
This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, and marking, labeling, packaging and transportation for plywood for solid wood composite flooring.
This standard is applicable to plywood for solid wood composite flooring, which is made by veneer assembly and gluing
2 Normative references
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrections), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition applies.
GB/T 9846.2-2004 Plywood - Part 2: Tolerances on dimension
GB/T 9846.3-2004 Plywood - Part 3: General specification for plywood for general use
GB/T 9846.4-2004 Plywood - Part 4: Specification for classification by appearance of plywood for general use
GB/T 9846.5-2004 Plywood - Part 5: Inspection codes of plywood for general use
GB/T 9846.6-2004 Plywood - Part 6: Marking, tag, packaging of plywood for general use
GB/T 17657-1999 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 18103-2000 Parquet
GB/T 19367.1-2003 Wood-based panels - Determination of thickness, width and length of boards
GB/T 19367.2-2003 Wood-based panels - Determination of squareness and straightness of boards
3 Terms and definitions
For the purposes of this standard, the following term and definition apply.
3.1
plywood for solid wood composite flooring
plywood for solid wood composite flooring, made by veneer assembly and gluing
Contents of LY/T 1738-2008
Foreword II
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Inspection methods
7 Inspection rules
8 Identification, packaging, transportation and storage
