1 Scope
This standard specifies the product classification, production technology requirements, product requirements, package, storage and transportation of wooden mirror.
This standard is applicable to wooden mirrors with solid wood material as the main frame structure, inlaid with reflecting materials (e.g. glass, metal and crystal, etc.).
2 Normative References
The following documents for the application of this document are essential. For dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 144 Log Inspection
GB/T 191-2008 Packaging-Pictorial Marking for Handling of Goods
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 4822 Sawn Timber Inspection
GB/T 4893.4 Furniture - Assessment of Adhesion of Surface Coatings - Cross Cut
GB/T 6739-2006 Paints and Varnishes - Determination of Film Hardness by Pencil Test
3 Terminologies and Definitions
Contents
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Classification
5 Production Technology Requirements and Quality Inspection
6 Inspection Method and Batch
7 Sampling Method
8 Ex-factory Inspection and Type Inspection
9 Marking, Packaging, Transportation and Storage of Products
1 Scope
This standard specifies the product classification, production technology requirements, product requirements, package, storage and transportation of wooden mirror.
This standard is applicable to wooden mirrors with solid wood material as the main frame structure, inlaid with reflecting materials (e.g. glass, metal and crystal, etc.).
2 Normative References
The following documents for the application of this document are essential. For dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 144 Log Inspection
GB/T 191-2008 Packaging-Pictorial Marking for Handling of Goods
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributea - Part1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 4822 Sawn Timber Inspection
GB/T 4893.4 Furniture - Assessment of Adhesion of Surface Coatings - Cross Cut
GB/T 6739-2006 Paints and Varnishes - Determination of Film Hardness by Pencil Test
3 Terminologies and Definitions
Contents of LY/T 2055-2012
Contents
Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Classification
5 Production Technology Requirements and Quality Inspection
6 Inspection Method and Batch
7 Sampling Method
8 Ex-factory Inspection and Type Inspection
9 Marking, Packaging, Transportation and Storage of Products