General technical requirements for painting, external marking and packing of solid rocket motors
1 Scope
This standard specifies the general technical requirements and inspection methods for painting, external marking and packaging of solid rocket motors.
This standard is applicable to the painting, external marking and packing of solid rocket motors (hereinafter referred to as motors).
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GB 190 Packing symbol of dangerous goods
GB 191 Packaging - Pictorial marking for handling of goods
GB/T 3181-1995 Colour standard for paint film
GB/T 5398 Test methods for large transport packages
GB/T 14691 Technical drawings- Lettering
GJB 2001 The safety requirements for package, transport and storage for initiating explosive device
GJB 2711-1996 Test methods for military transport packages
QJ 813A-1996 General specifications for painting
QJ 990.3 Inspection methods for coatings - Inspection methods for coating thickness
QJ 990.4 Inspection methods for coatings - Inspection methods for gloss of coatings
QJ 990.14-1986 Inspection methods for coatings - Inspection methods for adhesion of coatings
QJ 990.15 Inspection methods for coatings - Inspection methods for drying of coatings
QJ 2847 Specification for wooden packaging box for mechanical product
QJ 3069 Provisions on preparation of product serial no.
Foreword i
1 Scope
2 Normative references
3 General requirements
4 Painting
5 External marking
6 Packing
General technical requirements for painting, external marking and packing of solid rocket motors
1 Scope
This standard specifies the general technical requirements and inspection methods for painting, external marking and packaging of solid rocket motors.
This standard is applicable to the painting, external marking and packing of solid rocket motors (hereinafter referred to as motors).
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GB 190 Packing symbol of dangerous goods
GB 191 Packaging - Pictorial marking for handling of goods
GB/T 3181-1995 Colour standard for paint film
GB/T 5398 Test methods for large transport packages
GB/T 14691 Technical drawings- Lettering
GJB 2001 The safety requirements for package, transport and storage for initiating explosive device
GJB 2711-1996 Test methods for military transport packages
QJ 813A-1996 General specifications for painting
QJ 990.3 Inspection methods for coatings - Inspection methods for coating thickness
QJ 990.4 Inspection methods for coatings - Inspection methods for gloss of coatings
QJ 990.14-1986 Inspection methods for coatings - Inspection methods for adhesion of coatings
QJ 990.15 Inspection methods for coatings - Inspection methods for drying of coatings
QJ 2847 Specification for wooden packaging box for mechanical product
QJ 3069 Provisions on preparation of product serial no.
Contents of QJ 1354A-2005
Foreword i
1 Scope
2 Normative references
3 General requirements
4 Painting
5 External marking
6 Packing
