Cationic emulsified asphalt
1 Subject content and applicable scope
This standard specifies the technical requirements, test methods, inspection rules, packaging, storage and transportation requirements of cationic emulsified asphalt.
This standard is applicable to cationic emulsified asphalt produced by emulsifying petroleum asphalt for road pavement with emulsifier and water.
For the purpose of this standard, the products are applicable to road pavement.
2 Normative references
GB/T 4508 Standard test method for ductility of bitumen
GB/T 4509 Standard test method for penetration of bitumen
GB/T 11147 Asphalt sampling method
GB/T 11148 Test method for solubility of asphalt
SH/T 0099.1 Determination of Engle viscosity of emulsified asphalt
SH/T 0099.2 Determination of sieve residue of emulsified asphalt
SH/T 0099.3 Standard test method for particle charge of cationic emulsified asphalt
SH/T 0099.4 Determination of residue by evaporation of emulsified asphalt
SH/T 0099.5 Determination of storage stability of emulsified asphalt
SH/T 0099.6 Determination of cement mixing of emulsified asphalt
SH/T 0099.7 Test method for coating of emulsified asphalt
SH/T 0099.8 Test method for freezing stability of emulsified asphalt
SH/T 0099.9 Test method for emulsified asphalt with job aggregate coating
SH 0164 Petroleum and related products packaging, storage, transportation and acceptance of delivery rules
3 Product classification
For the purpose of this standard, the products are classified into two categories: penetration spraying ones and mixing ones by construction methods.
Represented by Letter "G", penetration spraying ones are reclassified into G-1, G-2 and G-3.
SH/T 0624-1995, SH 0624-1995, SHT 0624-1995, SH/T0624-1995, SH/T 0624, SH/T0624, SH0624-1995, SH 0624, SH0624, SHT0624-1995, SHT 0624, SHT0624
Introduction of SH/T 0624-1995
Cationic emulsified asphalt
1 Subject content and applicable scope
This standard specifies the technical requirements, test methods, inspection rules, packaging, storage and transportation requirements of cationic emulsified asphalt.
This standard is applicable to cationic emulsified asphalt produced by emulsifying petroleum asphalt for road pavement with emulsifier and water.
For the purpose of this standard, the products are applicable to road pavement.
2 Normative references
GB/T 4508 Standard test method for ductility of bitumen
GB/T 4509 Standard test method for penetration of bitumen
GB/T 11147 Asphalt sampling method
GB/T 11148 Test method for solubility of asphalt
SH/T 0099.1 Determination of Engle viscosity of emulsified asphalt
SH/T 0099.2 Determination of sieve residue of emulsified asphalt
SH/T 0099.3 Standard test method for particle charge of cationic emulsified asphalt
SH/T 0099.4 Determination of residue by evaporation of emulsified asphalt
SH/T 0099.5 Determination of storage stability of emulsified asphalt
SH/T 0099.6 Determination of cement mixing of emulsified asphalt
SH/T 0099.7 Test method for coating of emulsified asphalt
SH/T 0099.8 Test method for freezing stability of emulsified asphalt
SH/T 0099.9 Test method for emulsified asphalt with job aggregate coating
SH 0164 Petroleum and related products packaging, storage, transportation and acceptance of delivery rules
3 Product classification
For the purpose of this standard, the products are classified into two categories: penetration spraying ones and mixing ones by construction methods.
Represented by Letter "G", penetration spraying ones are reclassified into G-1, G-2 and G-3.