SJ/T 11336-2006 Interface specification for conditional access of digital television receiver - Part 1-1: DT-CI Technical specification (English Version)
1 Scope
This standard specifies the general interface of conditional access system of digital television receiver.
This standard is applicable to the set-card separation type digital television receiver.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding any amendments) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Abbreviations
5 Description and Architecture
5.1 Diagram of Module in Connection with Host
5.2 DTV-CI Interface
5.3 Transport Stream Interface
5.4 Command Interface
5.5 Physical Requirement
6 Transport Stream Interface
6.1 TSI-Physical, Link Layers
6.2 TSI-Transport Layer
6.3 TSI - Upper Layers
7 Command Interface-Transport & Session Layers
7.1 Data Structure
7.2 Transport Layer
7.3 Session Layer
8 Command Interface - Application Layer
8.1 Introduction
8.2 Resources
8.3 Application Protocol Data Units (APDU)
8.4 System Management Resources
8.5 Host Control and Information Resources
8.6 Man-Machine Interface Resource
8.7 Resource Identifiers and Application Object Tags
Appendix A (Normative) PC Card-based Specifications
A.1 Electrical Specification
A.1.1 Introduction
A.1.2 Common Pin
A.1.3 16-bit PC Card Electrical Interface
A.2 Physical Specification
A.2.1 Card Dimensions
A.2.2 Connector
A.3 Metaformat Specification
A.3.1 Introduction
A.3.2 Overview
A.3.3 Basic Compatibility (Layer 1)
Appendix B (Normative) PC Based Physical Layer
B.1 General Description
B.1.1 Introduction
B.1.2 PC Card Interface
B.1.3 Descrambler
B.1.4 Filter/extract
B.1.5 CPU
B.1.6 ROM/EPROM and RAM/NVRAM
B.1.7 Security Processor
B.2 Electrical Interface
B.2.1 Introduction
B.2.2 Transport Stream Interface
B.2.3 Command Interface
B.3 Link Layer
B.3.1 Transport Stream Interface
B.3.2 Command Interface
B.4 Implementation-specific Transport Sublayer over PC Card Interface
B.4.1 Transport Protocol Objects
B.4.2 Command TPDU
B.4.3 Response TPDU
B.4.4 Chaining of Command or Response TPDU Data Fields
B.4.5 Create Transport Connection (Create_T_C)
B.4.6 Create Transport Connection Reply C_T_C_Reply
B.4.7 Delete Transport Connection (Delete_T_C)
B.4.8 Delete Transport Connection Reply (D_T_C_Reply)
B.4.9 Request Transport Connection (Request_T_C)
B.4.10 New Transport Connection (New_T_C)
B.4.11 Transport Connection Error (T_C_Error)
B.4.12 List of C_TPDUs and associated R_TPDUs
B.4.13 Rules for the Polling Function
B.4.14 List of Transport Tags
B.5 PC Card subset to be used by Conformant Hosts and Modules
B.5.1 Introduction
B.5.2 Terminology
B.5.3 Physical Specification
B.5.4 Electrical Specification
B.5.5 Metaformat Specification
Appendix C (Informative) Additional Objects
C.1 Authentication
C.1.1 Authentication Request and Authentication Response
C.1.2 Authentication Resource Coding
C.2 Smart Card Reader Resource Class
C.2.1 Introduction
C.2.2 Objects
C.3 EPG Future Event Support Class
C.3.1 Introduction
C.3.2 Objects
C.3.3 EPG Future Event Support Resource Coding
SJ/T 11336-2006 Interface specification for conditional access of digital television receiver - Part 1-1: DT-CI Technical specification (English Version)
Standard No.
SJ/T 11336-2006
Status
valid
Language
English
File Format
PDF
Word Count
45000 words
Price(USD)
420.0
Implemented on
2006-3-29
Delivery
via email in 1 business day
Detail of SJ/T 11336-2006
Standard No.
SJ/T 11336-2006
English Name
Interface specification for conditional access of digital television receiver - Part 1-1: DT-CI Technical specification
1 Scope
This standard specifies the general interface of conditional access system of digital television receiver.
This standard is applicable to the set-card separation type digital television receiver.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding any amendments) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
Contents of SJ/T 11336-2006
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Abbreviations
5 Description and Architecture
5.1 Diagram of Module in Connection with Host
5.2 DTV-CI Interface
5.3 Transport Stream Interface
5.4 Command Interface
5.5 Physical Requirement
6 Transport Stream Interface
6.1 TSI-Physical, Link Layers
6.2 TSI-Transport Layer
6.3 TSI - Upper Layers
7 Command Interface-Transport & Session Layers
7.1 Data Structure
7.2 Transport Layer
7.3 Session Layer
8 Command Interface - Application Layer
8.1 Introduction
8.2 Resources
8.3 Application Protocol Data Units (APDU)
8.4 System Management Resources
8.5 Host Control and Information Resources
8.6 Man-Machine Interface Resource
8.7 Resource Identifiers and Application Object Tags
Appendix A (Normative) PC Card-based Specifications
A.1 Electrical Specification
A.1.1 Introduction
A.1.2 Common Pin
A.1.3 16-bit PC Card Electrical Interface
A.2 Physical Specification
A.2.1 Card Dimensions
A.2.2 Connector
A.3 Metaformat Specification
A.3.1 Introduction
A.3.2 Overview
A.3.3 Basic Compatibility (Layer 1)
Appendix B (Normative) PC Based Physical Layer
B.1 General Description
B.1.1 Introduction
B.1.2 PC Card Interface
B.1.3 Descrambler
B.1.4 Filter/extract
B.1.5 CPU
B.1.6 ROM/EPROM and RAM/NVRAM
B.1.7 Security Processor
B.2 Electrical Interface
B.2.1 Introduction
B.2.2 Transport Stream Interface
B.2.3 Command Interface
B.3 Link Layer
B.3.1 Transport Stream Interface
B.3.2 Command Interface
B.4 Implementation-specific Transport Sublayer over PC Card Interface
B.4.1 Transport Protocol Objects
B.4.2 Command TPDU
B.4.3 Response TPDU
B.4.4 Chaining of Command or Response TPDU Data Fields
B.4.5 Create Transport Connection (Create_T_C)
B.4.6 Create Transport Connection Reply C_T_C_Reply
B.4.7 Delete Transport Connection (Delete_T_C)
B.4.8 Delete Transport Connection Reply (D_T_C_Reply)
B.4.9 Request Transport Connection (Request_T_C)
B.4.10 New Transport Connection (New_T_C)
B.4.11 Transport Connection Error (T_C_Error)
B.4.12 List of C_TPDUs and associated R_TPDUs
B.4.13 Rules for the Polling Function
B.4.14 List of Transport Tags
B.5 PC Card subset to be used by Conformant Hosts and Modules
B.5.1 Introduction
B.5.2 Terminology
B.5.3 Physical Specification
B.5.4 Electrical Specification
B.5.5 Metaformat Specification
Appendix C (Informative) Additional Objects
C.1 Authentication
C.1.1 Authentication Request and Authentication Response
C.1.2 Authentication Resource Coding
C.2 Smart Card Reader Resource Class
C.2.1 Introduction
C.2.2 Objects
C.3 EPG Future Event Support Class
C.3.1 Introduction
C.3.2 Objects
C.3.3 EPG Future Event Support Resource Coding