Article 1 The Rules is formulated according to the Type test procedures for crane with a view to standardizing the type test work for mobile crane and ensuring the quality of type test work.
Article 2 The Rules is applicable to the type test of truck cranes, wheel cranes, all-terrain cranes, crawler cranes, load cranes, container straddle carriers, front-handling mobile cranes, side-handling mobile cranes and rubber tired transtainers (hereinafter collectively referred to as “mobile crane”) type test.
Article 3 The technical indexes and requirements of the Rules are referred to the following main standards:
(1) GB/T 3811-1983 Design rules for cranes;
(2) GB/T 5905-1986 Cranes - Test code and procedures;
(3) GB 20062-2006 Mobile cranes - Limits and measurement methods for operating noise;
(4) GB/T 6068.1~6068.3-2005 Test code for truck crane and mobile crane - Part 1: General requirements; Part 2: Performance test; Part 3: Structure test;
(15) GB/T 15362-1994 Test method of rubber-tyred transtainer;
(16) JT/T 232-1995 Front-handling mobile crane - Specification.
Article 4 The sample machine provided by the mobile crane manufacturer (hereinafter referred to as the “manufacturer”) shall meet the following requirements:
(1) The sample machine shall be consistent with the design drawings;
(2) The safety protection device that requires passing type test according to the regulations has passing the type test;
(3) The sample machine has been qualified upon self-inspection.
According to regulations, if the sample machine needs to be subjected to supervision and inspection, the type test shall be carried out on the basis that the supervision and inspection items are qualified.
Article 5 During the type test, the manufacturer shall provide at least the following technical documents of the sample machine:
Type test rules for mobile crane Annex A Type inspection items, contents, methods and requirements of mobile cranes Annex B Type test items, contents, methods and requirements of mobile cranes Annex C Type test report of special equipment
Standard
TSG Q7005-2008 Type Test Rules for Mobile Crane (English Version)
Type test rules for mobile crane
Article 1 The Rules is formulated according to the Type test procedures for crane with a view to standardizing the type test work for mobile crane and ensuring the quality of type test work.
Article 2 The Rules is applicable to the type test of truck cranes, wheel cranes, all-terrain cranes, crawler cranes, load cranes, container straddle carriers, front-handling mobile cranes, side-handling mobile cranes and rubber tired transtainers (hereinafter collectively referred to as “mobile crane”) type test.
Article 3 The technical indexes and requirements of the Rules are referred to the following main standards:
(1) GB/T 3811-1983 Design rules for cranes;
(2) GB/T 5905-1986 Cranes - Test code and procedures;
(3) GB 20062-2006 Mobile cranes - Limits and measurement methods for operating noise;
(4) GB/T 6068.1~6068.3-2005 Test code for truck crane and mobile crane - Part 1: General requirements; Part 2: Performance test; Part 3: Structure test;
(5) JB 8716-1998 Truck crane and wheel crane - Safety code;
(6) JB/T 4030.1~4030.2-2000 Test code for truck crane and wheel crane - Test of operating reliability; Test of travelling reliability;
(7) JG 5055-1994 Safety rules for crawler crane;
(8) GB/T 14560-1993 Technical requirement for cranes with lifting capacity up to 150 tons;
(9) GB/T 13330-1991 Test method of performance for crawler crane with lifting capacity up to 150 tons;
(10) JG/T 55-1999 Test method for the crawler crane structures;
(11) JB/T 5318-1991 Large crawler cranes - Technical conditions;
(12) QC/T 459-2004 Truck with loading crane;
(13) GB/T 16905-1997 Test method for the crane of container front-handling mobile;
(14) GB/T 14783-1993 Rubber tired transtainer - Specifications;
(15) GB/T 15362-1994 Test method of rubber-tyred transtainer;
(16) JT/T 232-1995 Front-handling mobile crane - Specification.
Article 4 The sample machine provided by the mobile crane manufacturer (hereinafter referred to as the “manufacturer”) shall meet the following requirements:
(1) The sample machine shall be consistent with the design drawings;
(2) The safety protection device that requires passing type test according to the regulations has passing the type test;
(3) The sample machine has been qualified upon self-inspection.
According to regulations, if the sample machine needs to be subjected to supervision and inspection, the type test shall be carried out on the basis that the supervision and inspection items are qualified.
Article 5 During the type test, the manufacturer shall provide at least the following technical documents of the sample machine:
Contents of TSG Q7005-2008
Type test rules for mobile crane
Annex A Type inspection items, contents, methods and requirements of mobile cranes
Annex B Type test items, contents, methods and requirements of mobile cranes
Annex C Type test report of special equipment
