This standard is applicable to hot rolled stainless steel with equal leg angles (hereinafter referred to as angle steel).
1 Type and Designation
Angle steel is classified into 2 types, namely 8 designations in total, according to organization characteristics. See Table 1 for the type and designation.
Table 1 Type and Designation
......
......
2 Dimension, Shape and Weight
2.1 See Table 2 for the standard dimension of angle steel.
2.2 The permissible dimension deviation of angle steel shall meet the requirements specified in Table 3.
2.3 Length of angle steel
2.3.1 The standard length of angle steel is specified as 4.0m, 5.0mnote and 6.0m.
Note: if possible, this dimension is not used for design.
1 Type and Designation 2 Dimension, Shape and Weight 3 Technical Requirements 4 Test Methods 5 Inspection Rules 6 Marking and Certificate Additional Explanation
Standard
YB/T 5309-2006 Hot rolled stainless steel with equal leg angles (English Version)
This standard is applicable to hot rolled stainless steel with equal leg angles (hereinafter referred to as angle steel).
1 Type and Designation
Angle steel is classified into 2 types, namely 8 designations in total, according to organization characteristics. See Table 1 for the type and designation.
Table 1 Type and Designation
......
......
2 Dimension, Shape and Weight
2.1 See Table 2 for the standard dimension of angle steel.
2.2 The permissible dimension deviation of angle steel shall meet the requirements specified in Table 3.
2.3 Length of angle steel
2.3.1 The standard length of angle steel is specified as 4.0m, 5.0mnote and 6.0m.
Note: if possible, this dimension is not used for design.
Contents of YB/T 5309-2006
1 Type and Designation
2 Dimension, Shape and Weight
3 Technical Requirements
4 Test Methods
5 Inspection Rules
6 Marking and Certificate
Additional Explanation
