1 Scope
This standard specifies the requirements for the operating frequencies, power levels, basic services and functions, receiver and transmitter performance, audio performance, environmental adaptability and reliability, and other aspects of the mobile station for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment.
This standard is applicable to 800MHz/2GHz cdma2000 mobile station supporting UIM/CSIM card (R-UIM) and not supporting UIM/CSIM card (ROM-UIM).
2 Normative References
The following referenced documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 4943.1 Information Technology Equipment - Safety - Part 1: General Requirements
GB/T 18287 General Specification of Lithinum-ion Battery for Cellular Phone
GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone
GB 19484.1 Requirement and Measurement Methods of Electromagnetic Compatibility for 800MHz CDMA Digital Cellular Telecommunications Systems - Part 1: Mobile Station and Ancillary Equipment
GB 21288 Limits for Human Local Exposure to Electromagnetic Fields Emitted by Mobile Phones
YD/T 965 The Safety Requirement and Test Method for Telecommunication Terminal Equipment
YD/T 1168 The Technical Requirement of User Identify Module(UIM) for 800MHz CDMA Digital Cellular Mobile Telecommunication Network
YD 1268 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1484 Measurement Method for Radiated RF Power and Receiver Performance of Mobile Stations
YD/T 1538 Technical Requirements and Testing Methods for Acoustics Performance of Digital Mobile Terminal
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1576.1 Testing Methods for 2GHz cdma2000 Digital Cellular Mobile Communication Network Equipment: Mobile Station - Part 1: Minimum Standard Function and Performance
YD/T 1580 Technical Specification for 2GHz cdma2000 Digital Cellular Mobile Communication Networks: Physical Layer of Air Interface
YD/T 1581 Technical Specification for 2GHz cdma2000 Digital Cellular Mobile Communication Network: Medium Access Control (MAC) of Air Interface
YD/T 1582 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks: Signaling Link Access Control (LAC)of Air Interface Specification
YD/T 1583 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks: Upper Layer (Layer 3)Signaling of Air Interface Specification
YD/T 1591 Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment
YD/T 1597.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz cdma2000 Digital Cellular Mobile Communications System - Part 1: User Equipment and Ancillary Equipment
YD/T 2307 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal
Foreword I
1 Scope
2 Normative References
3 Abbreviations
4 Operating Frequencies
5 Power Levels
6 Basic Services and Functions
7 Performance of Receiver and Transmitter
8 Audio Performance
9 Environmental Adaptability and Reliability
10 Standby Time and Talk Time
11 Card Interface
12 Content Requirements for Mobile Station Card (R-UIM) Compared with That (ROM-UIM)
13 Requirements for Air Interface
14 Requirements for Electrical Safety
15 Requirements for Electromagnetic Compatibility
16 Requirements for Specific Absorption Rate (SAR)
17 Radiated RF Power and Receiver Performance
18 Requirements for Power Supply and Charger of Mobile Station
19 Requirements for Appearance, Packaging and Assembly of Mobile Station
20 Technical Documents
21 Requirements for Data Card
1 Scope
This standard specifies the requirements for the operating frequencies, power levels, basic services and functions, receiver and transmitter performance, audio performance, environmental adaptability and reliability, and other aspects of the mobile station for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network equipment.
This standard is applicable to 800MHz/2GHz cdma2000 mobile station supporting UIM/CSIM card (R-UIM) and not supporting UIM/CSIM card (ROM-UIM).
2 Normative References
The following referenced documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 4943.1 Information Technology Equipment - Safety - Part 1: General Requirements
GB/T 18287 General Specification of Lithinum-ion Battery for Cellular Phone
GB/T 18288 General Specification of Nickel-metal Hydride Battery for Cellular Phone
GB/T 18289 General Specification of Nickel-cadmium Battery for Cellular Phone
GB 19484.1 Requirement and Measurement Methods of Electromagnetic Compatibility for 800MHz CDMA Digital Cellular Telecommunications Systems - Part 1: Mobile Station and Ancillary Equipment
GB 21288 Limits for Human Local Exposure to Electromagnetic Fields Emitted by Mobile Phones
YD/T 965 The Safety Requirement and Test Method for Telecommunication Terminal Equipment
YD/T 1168 The Technical Requirement of User Identify Module(UIM) for 800MHz CDMA Digital Cellular Mobile Telecommunication Network
YD 1268 The Safety Specification and Test Method for Lithium Batteries and Charger
YD/T 1484 Measurement Method for Radiated RF Power and Receiver Performance of Mobile Stations
YD/T 1538 Technical Requirements and Testing Methods for Acoustics Performance of Digital Mobile Terminal
YD/T 1539 Technical Requirements and Testing Methods for Reliability of Mobile Telecommunication Handset
YD/T 1576.1 Testing Methods for 2GHz cdma2000 Digital Cellular Mobile Communication Network Equipment: Mobile Station - Part 1: Minimum Standard Function and Performance
YD/T 1580 Technical Specification for 2GHz cdma2000 Digital Cellular Mobile Communication Networks: Physical Layer of Air Interface
YD/T 1581 Technical Specification for 2GHz cdma2000 Digital Cellular Mobile Communication Network: Medium Access Control (MAC) of Air Interface
YD/T 1582 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks: Signaling Link Access Control (LAC)of Air Interface Specification
YD/T 1583 800MHz/2GHz cdma2000 Digital Cellular Mobile Communication Networks: Upper Layer (Layer 3)Signaling of Air Interface Specification
YD/T 1591 Technical Requirements and Test Method of Charger and Interface for Mobile Telecommunication Terminal Equipment
YD/T 1597.1 Requirements and Measurement Methods of Electromagnetic Compatibility for 2GHz cdma2000 Digital Cellular Mobile Communications System - Part 1: User Equipment and Ancillary Equipment
YD/T 2307 Technical Requirement and Testing Methods for General Function of Mobile Telecommunication Terminal
Contents of YD/T 1558-2013
Foreword I
1 Scope
2 Normative References
3 Abbreviations
4 Operating Frequencies
5 Power Levels
6 Basic Services and Functions
7 Performance of Receiver and Transmitter
8 Audio Performance
9 Environmental Adaptability and Reliability
10 Standby Time and Talk Time
11 Card Interface
12 Content Requirements for Mobile Station Card (R-UIM) Compared with That (ROM-UIM)
13 Requirements for Air Interface
14 Requirements for Electrical Safety
15 Requirements for Electromagnetic Compatibility
16 Requirements for Specific Absorption Rate (SAR)
17 Radiated RF Power and Receiver Performance
18 Requirements for Power Supply and Charger of Mobile Station
19 Requirements for Appearance, Packaging and Assembly of Mobile Station
20 Technical Documents
21 Requirements for Data Card