Detail of YD/T 1763.2-2011

Introduction of YD/T 1763.2-2011

1 Scope This part specifies the test methods for USIM application characteristics of UICC-ME(Cu) interface of TD-SCDMA/WCDMA digital cellular mobile communication network, including test configuration, expected results and basic test procedure of test cases in such aspects as contract signing relevant or irrelevant process, safety-relevant, PLMN-relevant test environment and USIM service processing. The test methods defined in this part apply to application characteristics test for WCDMA terminal, TD-SCDMA terminal, WCDMA/TD-SCDMA dual-mode terminal, WCDMA/GSM dual-mode terminal, TD-SCDMA/GSM dual-mode terminal as well as Cu interface at application layer of UICC that supports USIM application. 2 Normative References The following documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For updated reference, the latest edition (including all the amendments) applies. YD/T 1762.1-2011 TD-SCDMA/WCDMA Digital Cellular Mobile Communication Network - Technical Specification for USIM-ME (Cu) Interface - Part 1: Physical, Electrical and Logical Characteristics YD/T 1762.2-2011 TD-SCDMA/WCDMA Digital Cellular Mobile Communication Network - Technical Specification for USIM-ME (Cu) Interface - Part 2: Application Characteristics of USIM ISO/ITU-T ASN.1 Abstract Syntax Notation One 3GPP TS 21.111 USIM and IC Card Requirements 3GPP TS 22.011 Service Accessibility 3GPP TS 22.024 Description of Charge Advice Information (CAI) 3GPP TS 22.030 Man-Machine Interface (MMI) of the User Equipment (UE) 3GPP TS 22.086 Advice of Charge (AoC) Supplementary Services; Stage 1 3GPP TS 22.101 Service Aspects; Service Principles 3GPP TS 23.003 Numbering, Addressing and Identification 3GPP TS 23.038 Alphabets and Language-specific Information 3GPP TS 23.040 Technical Realization of the Short Message Service (SMS) 3GPP TS 23.057 Mobile Execution Environment (MExE); Functional Description; Stage 2 3GPP TS 23.060 General Packet Radio Service (GPRS) ; Service Description; Stage 2 3GPP TS 23.086 Advice of Charge (AoC) Supplementary Services; Stage 2 3GPP TS 23.140 multimedia messaging service (MMS); Functional Description; Stage 2 3GPP TS 24.008 Mobile Radio Interface Layer 3 Specification; Core Network Protocols; Stage 3 3GPP TS 24.080 Mobile Radio Interface Layer 3 Supplementary Services Specification; Formats and Coding 3GPP TS 25.331 Radio Resource Control (RRC); Protocol Specification 3GPP TS 31.101 UICC-Terminal Interface; Physical and Logical Characteristics 3GPP TS 31.121 UICC-Terminal Interface; Universal Subscriber Identity Module (USIM) Application Test Specification ITU-T Recommendation T.50 International Reference Alphabet (IRA) (Formerly International Alphabet No. 5 or IA5) - Information Technology - 7-bit Coded Character Set for Information Interchange) 3 Abbreviations For the purposes of this document, the following abbreviations apply ... ... ... ... 4 Test Environment The test system configuration specified in this chapter applies to all test cases herein. The test environment and test case involved in this part apply to 3G terminals (including TD-SCDMA terminal, WCDMA terminal, TD-SCDMA/WCDMA dual-mode terminal, TD-SCDMA/GSM dual-mode terminal and WCDMA/GSM dual-mode terminal). 4.1 Test System Configuration Test system is composed of UICC simulator that supports USIM application and network simulator (UMTS network and GSM network). UICC card present in this part refers to universal integrated circuit card with USIM application; USIM card refers to universal integrated circuit card with USIM application and based on UICC platform. Unless otherwise specified, the terminal (or UE) in this part refers to 3G terminal, or TD-SCDMA terminal, WCDMA terminal, or dual-mode terminals such as TD-SCDMA/WCDMA, TD-SCDMA/GSM and WCDMA/GSM. Network device refers to the network device or network simulator that provides the required 3G network system environment or 2G network system environment. Generally, the use of UTRAN in test item indicates 3G network system environment and the use of BSS indicates 2G network system environment. UTRAN can indicate both WCDMA network system and TD-SCDMA network system. Here, BSS refers specifically to GSM network system. It shall be noted that as a need for rapid test, USIM card simulator can be used for test. Figure 1 and Figure 2 can be used as references for establishing test system.

Contents of YD/T 1763.2-2011

Foreword i 1 Scope 2 Normative References 3 Abbreviations 4 Test Environment 4.1 Test System Configuration 4.2 UICC Default Configuration 5 Test of Contract Signing Relevant Process 5.1 Processing of IMSI/TMSI 5.2 Access Control Processing 5.3 Processing of ICCID 6 Test of Safety Relevant Process 6.1 Processing of PIN 6.2 Processing of FDN 6.3 (Void) 6.4 Processing of AoC 7 Test of LMN Relevant Process 7.1 Processing of FPLMN List 7.2 User-controlled PLMN Selector Processing 7.3 Operator-controlled PLMN Selector Processing 7.4 High Priority PLMN Search Processing 8 Contract-independent Process Test 8.1 Phone Book Processing 8.2 Short Message Processing Report 8.3 Relevant Tests on MMS 8.4 Detection of the Presence or Absence of USIM 9 USIM Service Processing 9.1 Access Point Name Control List Processing 9.2 Service Dialing Number Processing