This part specifies the dimensions and other relevant requirements of 14 dentistry diamond rotary instruments of most common shapes, including the quality control of such rotary instruments.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 6682-2008 Water for Analytical Laboratory Use - Specification and Test Methods (mod ISO 3696:1987)
ISO 1797-1: 1992 Dental Rotary Instruments - Shanks - Part 1: Shanks Made of Metals
ISO 2157: 1992 Dental Rotary Instruments - Nominal Diameters and Designation Code Number
ISO 6360-1: 2004 Dentistry - Number Coding System for Rotary Instruments - Part 1: General Characteristics
ISO 6360-2: 2004 Dentistry - Number Coding System for Rotary Instruments - Part 2: Shapes
ISO 7711-3: 2004 Dentistry - Diamond Rotary Instrument - Part 3: Grit Size, Designation and Color Code
ISO 8325: 2004 Dentistry - Test Methods for Rotary Instruments
3 Symbols
For the purposes of this part, the following symbols apply:
d1: the working part diameter; head diameter
d2: the neck diameter, namely the diameter of shank next to the diamond plating.
d3: the neck diameter of plating, namely the minimum diameter
Foreword I Introduction II 1 Scope 2 Normative References 3 Symbols 4 Requirements 5 Test 6 Quality Control 7 Marking 8 Packaging
1 Scope
This part specifies the dimensions and other relevant requirements of 14 dentistry diamond rotary instruments of most common shapes, including the quality control of such rotary instruments.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 6682-2008 Water for Analytical Laboratory Use - Specification and Test Methods (mod ISO 3696:1987)
ISO 1797-1: 1992 Dental Rotary Instruments - Shanks - Part 1: Shanks Made of Metals
ISO 2157: 1992 Dental Rotary Instruments - Nominal Diameters and Designation Code Number
ISO 6360-1: 2004 Dentistry - Number Coding System for Rotary Instruments - Part 1: General Characteristics
ISO 6360-2: 2004 Dentistry - Number Coding System for Rotary Instruments - Part 2: Shapes
ISO 7711-3: 2004 Dentistry - Diamond Rotary Instrument - Part 3: Grit Size, Designation and Color Code
ISO 8325: 2004 Dentistry - Test Methods for Rotary Instruments
3 Symbols
For the purposes of this part, the following symbols apply:
d1: the working part diameter; head diameter
d2: the neck diameter, namely the diameter of shank next to the diamond plating.
d3: the neck diameter of plating, namely the minimum diameter
Contents of YY 0761.1-2009
Foreword I
Introduction II
1 Scope
2 Normative References
3 Symbols
4 Requirements
5 Test
6 Quality Control
7 Marking
8 Packaging
