This standard specifies the classification and designation, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of haemostatic forceps.
This standard is applicable to haemostatic forceps for clamping blood vessels and tissues in the human body for haemostasis.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB 2766-1995 Haemostatic forceps with box joint - General specifications
YY/T 0173.3-1994 Surgical instruments - Gill shaft for forceps
YY/T 0173.4-1994 Surgical instruments - Teeth
YY/T 0173.5-1994 Surgical instruments - Serration
YY/T 0173.6-1994 Surgical instruments - Ratchet
YY/T 0173.8-1994 Surgical instruments - Ellipsoid ring
3 Classification and designation
3.1 The types and basic dimensions of forceps shall meet those specified in Figure 1, Figure 2, and Table 1.
3.2 The gill shaft for forceps shall meet the requirements of YY/T 0173.3-1994; the teeth shall meet those of YY/T 0173.4-1994; the serration shall meet those of YY/T 0173.5-1994; the ratchet shall meet those of YY/T 0173.6-1994; and the ellipsoid ring shall meet those of YY/T 0173.8-1994.
Foreword i 1 Scope 2 Normative references 3 Classification and designation 4 Requirements 5 Test methods 6 Inspection rules 7 Marking 8 Packaging, transportation and storage 9 Others
YY/T 0452-2003 Haemostatic forceps
1 Scope
This standard specifies the classification and designation, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of haemostatic forceps.
This standard is applicable to haemostatic forceps for clamping blood vessels and tissues in the human body for haemostasis.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB 2766-1995 Haemostatic forceps with box joint - General specifications
YY/T 0173.3-1994 Surgical instruments - Gill shaft for forceps
YY/T 0173.4-1994 Surgical instruments - Teeth
YY/T 0173.5-1994 Surgical instruments - Serration
YY/T 0173.6-1994 Surgical instruments - Ratchet
YY/T 0173.8-1994 Surgical instruments - Ellipsoid ring
3 Classification and designation
3.1 The types and basic dimensions of forceps shall meet those specified in Figure 1, Figure 2, and Table 1.
3.2 The gill shaft for forceps shall meet the requirements of YY/T 0173.3-1994; the teeth shall meet those of YY/T 0173.4-1994; the serration shall meet those of YY/T 0173.5-1994; the ratchet shall meet those of YY/T 0173.6-1994; and the ellipsoid ring shall meet those of YY/T 0173.8-1994.
Contents of YY/T 0452-2003
Foreword i
1 Scope
2 Normative references
3 Classification and designation
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging, transportation and storage
9 Others
