This standard specifies the design requirements, basic requirements of communication system route and section design, microwave station design and other technical requirements of relay communication circuit of PDH (Plesiochronous Digital Hierarchy)and SDH (Synchronous Digital Hierarchy) digital microwave.
This standard is applicable to the PDH microwave communication trunk engineering of capacity in Secondary order or more and trunk engineering design of inter-provincial and province range SDH microwave relay communication. And the design for extension, reconstruction project and small scale microwave communication project may also refers to this standard.
Foreword I
1 Scope
2 Normative References
3 General Provisions
4 PDH Section
4.1 Terms
4.2 Technical Requirements for Design of Digital Microwave Relay Communication Circuit
5 SDH Section
5.1 Terms
5.2 Technical Requirements for System Engineering Design of SDH Microwave Relay Communication Circuit
6 Basic Requirements of Route and Section Design for Microwave Radio Relay Communication
6.1 Section and Station Space
6.2 Clearance Standard
6.3 Branch, Transition and Overshoot Interference of Line
6.4 Antenna Height and Space Diversity Space
6.5 Frequency Range Selection and Polarization Configuration
7 Design Requirements of Microwave Station
7.1 Station Site
7.2 Water, Electricity, Road and Communication Telephone
7.3 General Layout
7.4 Machine Room Building
7.5 Power Supply System
7.6 Microwave Tower, Antenna and Feeder
7.7 Equipment Layout
7.8 Illumination
7.9 Lightning Protection and Grounding
7.10 Unattended Microwave Station
This standard specifies the design requirements, basic requirements of communication system route and section design, microwave station design and other technical requirements of relay communication circuit of PDH (Plesiochronous Digital Hierarchy)and SDH (Synchronous Digital Hierarchy) digital microwave.
This standard is applicable to the PDH microwave communication trunk engineering of capacity in Secondary order or more and trunk engineering design of inter-provincial and province range SDH microwave relay communication. And the design for extension, reconstruction project and small scale microwave communication project may also refers to this standard.
Contents of DL/T 5025-2005
Foreword I
1 Scope
2 Normative References
3 General Provisions
4 PDH Section
4.1 Terms
4.2 Technical Requirements for Design of Digital Microwave Relay Communication Circuit
5 SDH Section
5.1 Terms
5.2 Technical Requirements for System Engineering Design of SDH Microwave Relay Communication Circuit
6 Basic Requirements of Route and Section Design for Microwave Radio Relay Communication
6.1 Section and Station Space
6.2 Clearance Standard
6.3 Branch, Transition and Overshoot Interference of Line
6.4 Antenna Height and Space Diversity Space
6.5 Frequency Range Selection and Polarization Configuration
7 Design Requirements of Microwave Station
7.1 Station Site
7.2 Water, Electricity, Road and Communication Telephone
7.3 General Layout
7.4 Machine Room Building
7.5 Power Supply System
7.6 Microwave Tower, Antenna and Feeder
7.7 Equipment Layout
7.8 Illumination
7.9 Lightning Protection and Grounding
7.10 Unattended Microwave Station
