1 Scope
This standard specifies the quality supervision requirements of power equipment during manufacturing process, and proposes guiding opinion for supervision content and witness manner of power equipment.
This standard is only applicable to the supervision for manufacturing process of electric power equipment according to contract (containing cooperation parts and outsourcing products), including construction, extension and renovation projects as thermal power, hydroelectric power, wind generated electricity, power transmission and transformation and combined thermal power generation, quality supervision not replacing national or professional executive department as well as quality acceptance of equipment after approaching construction site. The nuclear power conventional island and BOP equipment may refer to this standard.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB/T 19001-2000 "Quality Management Systems-Requirements"
Decree No. 28 of GAQSIQ in 2002 "Administrative Measures on Qualification of Equipment Supervision Institutions"-November 01, 2002, General Administration of Quality Supervision, Inspection and Quarantine
GRBF [2003] No. 40 "Tentative Specification for Professional qualification System of Certified Equipment Supervisor", Ministry of Personnel of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine, October 29, 2003
3 Terms and Definitions
The following terms and definitions are suitable for this standard
3.1
User
It refers to project legal man of buyer signing delivery contract of equipment.
3.2
Client
It refers to the user or the legal agent that representing the user to implement the buyer function of equipment delivery contract and Party A signing service contract of equipment manufacturing supervision.
3.3
Manufacture
It refers to the legal person organization of the seller signing equipment delivery contract, including sub-contractor and sub-supplier.
3.4
Manufacturing supervision
It refers to the supervision for the quality of equipment manufacture process by equipment supervision organization with client entrustment according to delivery contract, national relevant regulations, rules and technical standards.
3.5
Hold point H point
It refers to important procedure node, acceptance point of concealed work and critical test or acceptance point of non-repeatable test.
Note: the user and/or manufacturing supervision representative must participate in the hold point project, and the next procedure may be carried out after field inspection approval.
3.6
Witness point W point
It refers to supervision and inspection for certain process during product manufacturing process in site.
Note: the manufacturing supervision representative (or joint participating of user and manufacturing supervision representative) shall carry out field supervision and inspection for test and inspection process of manufacture in site, and sign and confirm those meeting the requirements.
3.7
Record point R point
It refers to consult the information provided by manufacture as raw materials of equipment of relevant contract, elements and components, outsourcing and cooperation parts as well as inspection and test record information during manufacturing process.
Note: the manufacturing supervision representative shall sign and confirm the qualified information
Contents
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
5 Responsibilities and Authorities of Client, Supervision Organization and Manufacture
5.1 Responsibilities and Authorities of Client
5.2 Responsibilities and Authorities of Supervision Organization
5.3 Responsibilities and Authorities of Manufacture
6 Implementation of Supervision Work
6.1 Signing of Supervision Contract
6.2 Preparations for Supervision Work
6.3 Supervision Work on Site
6.4 Management of Supervision Data
Appendix A (Normative) Witness Items on Manufacturing Quality of Large-scale Utility Boilers and Auxiliary Machinery Equipments
Appendix B (Normative) Witness Item on Manufacturing Quality of Large Scale Power Station Steam Turbine and Auxiliary Machinery Equipment
Appendix C (Normative) Witness Item on Manufacturing Quality of Large Scale Power Station Turbogenerator and Auxiliary Machinery Equipment
Appendix D (Normative) Witness Items on Manufacturing Quality of Large Scale Water Turbines and Waterturbine Generator Set Equipments
Appendix E (Normative) Witness Items on Manufacturing Quality of Equipments as Large Transformer, Breaker, Reactor and Combined Electrical Device
Appendix F (Normative) Witness Items on Manufacturing Quality of Gas Turbine Engine
Appendix G (Normative) Witness Items on Manufacturing Quality of Desulfurization and Denitration Equipments
Appendix H (Normative) Witness Items on Manufacturing Quality of Four Main Pipelines, Piping and Pipe Fittings
Appendix I (Normative) Witness Items on Manufacturing Quality of the Main Plant Steel Structure Equipments
Appendix J (Normative) Witness Items on Manufacturing Quality of Wind Power Generation Equipment
Appendix K (Normative) Witness Items on Manufacturing Quality of Iron Tower and Conductor
1 Scope
This standard specifies the quality supervision requirements of power equipment during manufacturing process, and proposes guiding opinion for supervision content and witness manner of power equipment.
This standard is only applicable to the supervision for manufacturing process of electric power equipment according to contract (containing cooperation parts and outsourcing products), including construction, extension and renovation projects as thermal power, hydroelectric power, wind generated electricity, power transmission and transformation and combined thermal power generation, quality supervision not replacing national or professional executive department as well as quality acceptance of equipment after approaching construction site. The nuclear power conventional island and BOP equipment may refer to this standard.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this standard.
GB/T 19001-2000 "Quality Management Systems-Requirements"
Decree No. 28 of GAQSIQ in 2002 "Administrative Measures on Qualification of Equipment Supervision Institutions"-November 01, 2002, General Administration of Quality Supervision, Inspection and Quarantine
GRBF [2003] No. 40 "Tentative Specification for Professional qualification System of Certified Equipment Supervisor", Ministry of Personnel of the People's Republic of China, General Administration of Quality Supervision, Inspection and Quarantine, October 29, 2003
3 Terms and Definitions
The following terms and definitions are suitable for this standard
3.1
User
It refers to project legal man of buyer signing delivery contract of equipment.
3.2
Client
It refers to the user or the legal agent that representing the user to implement the buyer function of equipment delivery contract and Party A signing service contract of equipment manufacturing supervision.
3.3
Manufacture
It refers to the legal person organization of the seller signing equipment delivery contract, including sub-contractor and sub-supplier.
3.4
Manufacturing supervision
It refers to the supervision for the quality of equipment manufacture process by equipment supervision organization with client entrustment according to delivery contract, national relevant regulations, rules and technical standards.
3.5
Hold point H point
It refers to important procedure node, acceptance point of concealed work and critical test or acceptance point of non-repeatable test.
Note: the user and/or manufacturing supervision representative must participate in the hold point project, and the next procedure may be carried out after field inspection approval.
3.6
Witness point W point
It refers to supervision and inspection for certain process during product manufacturing process in site.
Note: the manufacturing supervision representative (or joint participating of user and manufacturing supervision representative) shall carry out field supervision and inspection for test and inspection process of manufacture in site, and sign and confirm those meeting the requirements.
3.7
Record point R point
It refers to consult the information provided by manufacture as raw materials of equipment of relevant contract, elements and components, outsourcing and cooperation parts as well as inspection and test record information during manufacturing process.
Note: the manufacturing supervision representative shall sign and confirm the qualified information
Contents of DL/T 586-2008
Contents
1 Scope
2 Normative References
3 Terms and Definitions
4 General Requirements
5 Responsibilities and Authorities of Client, Supervision Organization and Manufacture
5.1 Responsibilities and Authorities of Client
5.2 Responsibilities and Authorities of Supervision Organization
5.3 Responsibilities and Authorities of Manufacture
6 Implementation of Supervision Work
6.1 Signing of Supervision Contract
6.2 Preparations for Supervision Work
6.3 Supervision Work on Site
6.4 Management of Supervision Data
Appendix A (Normative) Witness Items on Manufacturing Quality of Large-scale Utility Boilers and Auxiliary Machinery Equipments
Appendix B (Normative) Witness Item on Manufacturing Quality of Large Scale Power Station Steam Turbine and Auxiliary Machinery Equipment
Appendix C (Normative) Witness Item on Manufacturing Quality of Large Scale Power Station Turbogenerator and Auxiliary Machinery Equipment
Appendix D (Normative) Witness Items on Manufacturing Quality of Large Scale Water Turbines and Waterturbine Generator Set Equipments
Appendix E (Normative) Witness Items on Manufacturing Quality of Equipments as Large Transformer, Breaker, Reactor and Combined Electrical Device
Appendix F (Normative) Witness Items on Manufacturing Quality of Gas Turbine Engine
Appendix G (Normative) Witness Items on Manufacturing Quality of Desulfurization and Denitration Equipments
Appendix H (Normative) Witness Items on Manufacturing Quality of Four Main Pipelines, Piping and Pipe Fittings
Appendix I (Normative) Witness Items on Manufacturing Quality of the Main Plant Steel Structure Equipments
Appendix J (Normative) Witness Items on Manufacturing Quality of Wind Power Generation Equipment
Appendix K (Normative) Witness Items on Manufacturing Quality of Iron Tower and Conductor