1 Scope
This standard is applicable primarily to steam turbines for driving generator. Some of its provisions are also applicable to steam turbines for other applications.
The purpose of this standard is to make a domestic intending user (purchaser) aware of options and alternatives which he may wish to consider, and to enable him to state his technical requirements clearly to potential suppliers
This standard is applicable primarily to high-capacity condensing turbine plants; other types of steam turbine plants for power generation and small and medium steam turbine unit above 20MW may also refer to it.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
Contents
Foreword II
Introduction III
1 Scope
2 Normative References
3 Terms and Definitions
4 Guarantees
5 Governing (Control)
6 Operation and Maintenance
7 Components
8 Foundations and Buildings
9 Feed Pump Drives
10 Turbine Auxiliary System
11 Instrumentation
12 Protection
13 Vibration
14 Noise
15 Inspection and Test
16 Delivery and Installation
17 Design Information to Be Supplied by the Purchaser
18 Design Information to Be Provided by the Supplier
19 Turbine with Regenerative Feed Water Heating
20 Other Guarantees
Appendix A (Informative) Comparison Table of the Chapter and Article Numbers in This Standard and in IEC 60045-1:
Appendix B (Informative) Technical Differences between This Standard and IEC 60045-1:1991 and the Reasons
Appendix C (Normative) Electronic Governors
Appendix D (Informative) Technical Requirements for Typical Packing, Marking, Transport and Storage
Appendix E (Informative) Typical Technical Specification
Appendix F (Informative) Typical Technical Documentation and Drawing
1 Scope
This standard is applicable primarily to steam turbines for driving generator. Some of its provisions are also applicable to steam turbines for other applications.
The purpose of this standard is to make a domestic intending user (purchaser) aware of options and alternatives which he may wish to consider, and to enable him to state his technical requirements clearly to potential suppliers
This standard is applicable primarily to high-capacity condensing turbine plants; other types of steam turbine plants for power generation and small and medium steam turbine unit above 20MW may also refer to it.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
Contents of DL/T 892-2004
Contents
Foreword II
Introduction III
1 Scope
2 Normative References
3 Terms and Definitions
4 Guarantees
5 Governing (Control)
6 Operation and Maintenance
7 Components
8 Foundations and Buildings
9 Feed Pump Drives
10 Turbine Auxiliary System
11 Instrumentation
12 Protection
13 Vibration
14 Noise
15 Inspection and Test
16 Delivery and Installation
17 Design Information to Be Supplied by the Purchaser
18 Design Information to Be Provided by the Supplier
19 Turbine with Regenerative Feed Water Heating
20 Other Guarantees
Appendix A (Informative) Comparison Table of the Chapter and Article Numbers in This Standard and in IEC 60045-1:
Appendix B (Informative) Technical Differences between This Standard and IEC 60045-1:1991 and the Reasons
Appendix C (Normative) Electronic Governors
Appendix D (Informative) Technical Requirements for Typical Packing, Marking, Transport and Storage
Appendix E (Informative) Typical Technical Specification
Appendix F (Informative) Typical Technical Documentation and Drawing
