1 Scope
This standard specifies survey method for human body head girth, as well as specification code, marking and positioning for caps.
This standard is applicable to the acquisition of survey data for human body head girth, development of specification and specification code marking for caps.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For the undated reference, the latest edition (including any amendments) applies.
GB 5296.4-2012 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 permanent label
label that is permanently attached on the product and can be kept legible and durable in the product use cycle.
[Definition 3.5 in GB 5296.4-2012]
3.2 hang label
label that is hung on the product.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Controlled Position and Units of Measurement
5 Measurement
6 Cap Specification Code
7 Positioning of Cap Specification Code Label
1 Scope
This standard specifies survey method for human body head girth, as well as specification code, marking and positioning for caps.
This standard is applicable to the acquisition of survey data for human body head girth, development of specification and specification code marking for caps.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For the undated reference, the latest edition (including any amendments) applies.
GB 5296.4-2012 Instructions for Use of Products of Consumer Interest - Part 4: Textiles and Apparel
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 permanent label
label that is permanently attached on the product and can be kept legible and durable in the product use cycle.
[Definition 3.5 in GB 5296.4-2012]
3.2 hang label
label that is hung on the product.
Contents of FZ/T 80010-2016
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Controlled Position and Units of Measurement
5 Measurement
6 Cap Specification Code
7 Positioning of Cap Specification Code Label