This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of toothbrushes with tapered filament.
This standard is applicable to adults and children manual flocking toothbrushes with whole or part tapered brush filaments.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 6682-2008 Water for Analytical Laboratory Use - Specification and Test Methods
GB 19342-2013 Toothbrushes
GB 30002-2013 Children Toothbrushes
3 Terms and Definitions
For the purpose of this document, the following terms and definitions apply.
Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Product Classification 5 Requirements 6 Test Method 7 Inspection Rules 8 Marking, Packaging, Transportation and Storage Appendix A (Normative) Test Method for the PH Value of Tapered Filament
1 Scope
This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of toothbrushes with tapered filament.
This standard is applicable to adults and children manual flocking toothbrushes with whole or part tapered brush filaments.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 6682-2008 Water for Analytical Laboratory Use - Specification and Test Methods
GB 19342-2013 Toothbrushes
GB 30002-2013 Children Toothbrushes
3 Terms and Definitions
For the purpose of this document, the following terms and definitions apply.
Contents of GB 30003-2013
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Appendix A (Normative) Test Method for the PH Value of Tapered Filament
