Detail of GB 4343.2-2009

Introduction of GB 4343.2-2009

1 Scope and Object 1.1 This part deals with the electromagnetic immunity of appliances and similar apparatus for household and similar purposes that use electricity, as well as electric toys and electric tools, the rated voltage of the apparatus being not more than 250V for single-phase apparatus to be connected to phase and neutral, and 480V for other apparatus. Apparatus may incorporate motors, heating elements or their combination, may contain electric or electronic circuitry, and may be powered by the mains supply, by transformer, by batteries, or by any other electrical power source. Apparatus not intended for household use, but which nevertheless may require the immunity level, such as apparatus intended to be used by laymen in shops, in light industry and on farms, are within the scope of this part, as far as they are included in GB 4343.1, and in addition: - microwave ovens for domestic use and catering; - cooking hobs and cooking ovens, heated by means of r.f. energy, (single- and multiple-zone) induction cooking appliances; - personal care equipment with radiation range from UV to IR (including visible light). 1.2 This part does not apply to: - equipment for lighting purposes; - apparatus designed for heavy industrial purposes; - apparatus intended to be part of the fixed electrical installation of buildings (such as fuses, circuit breakers, cables and switches); - apparatus intended to be used in locations where special electromagnetic conditions prevail, such as the presence of high e.m. fields (for example in the vicinity of a broadcast transmitting station), or where high pulses occur on the power network (such as in a power generator station); - radio and television receivers, audio and video equipment, and electronic music instruments other than toys; - medical electrical appliances; - personal computers and similar equipment other than toys; - radio transmitters; - apparatus designed to be used exclusively in vehicles; - babies surveillance systems. 1.3 Immunity requirements in the frequency range 0Hz to 400GHz are covered. 1.4 The effects of electromagnetic phenomena relating to the safety of apparatus are excluded from this part and are covered by other standards, for example GB 4706. Abnormal operation of the apparatus (such as simulated faults in the electric circuitry for testing purposes) is not taken into consideration. Note: Attention is drawn to the fact that additional immunity requirements may be necessary for apparatus intended to be used on board ships or aircraft. 1.5 The object of this part is to specify the immunity requirements for apparatus defined in the scope in relation to continuous and transient, conducted and radiated electromagnetic disturbances, including electrostatic discharges. These requirements represent essential electromagnetic compatibility immunity requirements. Note: In special cases situations will arise where the level of disturbances may exceed the test values specified in this part. In these instances, special mitigation measure may have to be employed. 2 Normative References The provisions of the following standards, through reference in this part of GB 4343, constitute provisions of this part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest versions apply. GB/T 4365-2003 Electrotechnical Terminology - Electromagnetic Compatibility (IEC 60050 (161):1990, IDT) GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test (IEC 61000-4-2:2001, IDT) GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test (IEC 61000-4-3:2002, IDT) GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test (IEC 61000-4-4:2004, IDT) GB/T 17626.5-2008 Electromagetic Compatibility - Testing and Measurement Techniques - Surge (Impact) Immunity Test (IEC 61000-4-5:2005, IDT) GB/T 17626.6-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances, Induced by Radio-frequency Fields (IEC 61000-4-6:2006, IDT) GB/T 17626.11-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests (IEC 61000-4-11:2004, IDT) GB 4343.1-2009 Electromagnetic Compatibility - Requirements for Household Appliances Electric Tools and Similar Apparatus - Part 1: Emission (CISPR 14-1:2005, IDT) 3 Terms and Definitions For the purposes of this part, the terms and definitions related to EMC found in GB/T 4365-2003, as well as the following terms and definitions apply.

Contents of GB 4343.2-2009

Foreword i Introduction iv 1 Scope and Object 2 Normative References 3 Terms and Definitions 4 Classification of Apparatus 5 Tests 6 Performance Criteria 7 Applicability of Immunity Tests 8 Conditions during Testing 9 Assessment of Conformity Bibliography Figure 1 Examples of Ports Table 1 Enclosure Port Table 2 Ports for Signal Lines and Control Lines Table 3 Input and Output DC Power Ports Table 4 Input and Output AC Power Ports Table 5 Ports for Signal Lines and Control Lines Table 6 Input and Output DC Power Ports Table 7 Input and Output AC Power Ports Table 8 Ports for Signal Lines and Control Lines Table 9 Input and Output DC Power Ports Table 10 Input and Output AC Power Ports Table 11 Enclosure Port Table 12 Input AC Power Ports Table 13 Input AC Power Ports Table 14 Examples of Performance Degradations