GB/T 17200-2008 Technical specification for tensile compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) (English Version)
1 Scope
This Standard specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.
2 Normative References
The following normative document contains provisions which, through reference in this text, constitute provisions of this Standard For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 16825.1-2008 Verification of Static Uniaxial Testing Machines — Part 1: Tension/Compression Testing Machines — Verification and Calibration of the Force-measuring System (ISO 7500-1:2004, Metallic Materials — Verification of Static Uniaxial Testing Machines — Part 1: Tension/Compression Testing Machines — Verification and Calibration of the Force-measuring System, IDT)
3 Terms and Definitions
For the purposes of this Standard, the following terms and definitions apply.
3.1
tensile-testing system
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Designation of Testing Machine Class
5 Design Features
5.1 Size and Construction
5.2 Axial Alignment of the Testing Machine
5.3 Test Piece Grips
5.4 Drive Characteristics
5.5 Jigs for Use in Compression, Shear and Flexure Testing
6 Types of Force-measuring System
7 Steady-state Machine Accuracy
8 Dynamic Machine Accuracy
9 Measurement of Elongation (Deflection)
10 Rate of Displacement of Driven Grip
11 Machine Stiffness
12 Stability
13 Certificate of Verification
GB/T 17200-2008 Technical specification for tensile compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) (English Version)
Standard No.
GB/T 17200-2008
Status
valid
Language
English
File Format
PDF
Word Count
5000 words
Price(USD)
80.0
Implemented on
2009-1-1
Delivery
via email in 1 business day
Detail of GB/T 17200-2008
Standard No.
GB/T 17200-2008
English Name
Technical specification for tensile compression and flexural testing machines for rubber and plastics (constant rate of rtaverse)
1 Scope
This Standard specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.
2 Normative References
The following normative document contains provisions which, through reference in this text, constitute provisions of this Standard For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 16825.1-2008 Verification of Static Uniaxial Testing Machines — Part 1: Tension/Compression Testing Machines — Verification and Calibration of the Force-measuring System (ISO 7500-1:2004, Metallic Materials — Verification of Static Uniaxial Testing Machines — Part 1: Tension/Compression Testing Machines — Verification and Calibration of the Force-measuring System, IDT)
3 Terms and Definitions
For the purposes of this Standard, the following terms and definitions apply.
3.1
tensile-testing system
Contents of GB/T 17200-2008
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Designation of Testing Machine Class
5 Design Features
5.1 Size and Construction
5.2 Axial Alignment of the Testing Machine
5.3 Test Piece Grips
5.4 Drive Characteristics
5.5 Jigs for Use in Compression, Shear and Flexure Testing
6 Types of Force-measuring System
7 Steady-state Machine Accuracy
8 Dynamic Machine Accuracy
9 Measurement of Elongation (Deflection)
10 Rate of Displacement of Driven Grip
11 Machine Stiffness
12 Stability
13 Certificate of Verification
