This standard specifies electromagnetic compatibility requirements and methods of measurement of audio video apparatus on board
This standard is applicable to audio video apparatus on board for various kind of motor vehicle.
Note: This standard is applicable to audio or video function of multimedia apparatus on board. For equipment that do not have audio and video as their main function (such as GPS navigation system with DVD playing function), they are only available for their audio and video functions.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard, however parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB 3174 Characteristics of PAL-D television broadcasting system
GB/T 6113.1 Specifications for radio disturbance and immunity measuring apparatus
GB/T 9383 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
GB 13837 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (GB 13837-2003, IEC/CISPR 13:2001,MOD)
GB/T 19951 Road vehicles - Test methods for electrical disturbances from electrostatic discharge (GB/T 19951 - 2005,ISO 10605:2001,IDT)
GB/T 21437.2 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only (GB/T 21437.2 2008, ISO 7637-2:2004,IDT)
ISO 11452-2 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
3 Definitions
For the purpose of this standard, the terms and definitions specified in GB/T 4365 and GB 13837 apply.
4 General
4.1 General requirements of measurement
Each audio and video function of a multifunction device shall be tested.
Note: It is recommended that, as each function is tested, attention shall be paid to the effect that certain sensitive ancillary apparatus may have on the test results.
Foreword i 1 Scope 2 Normative references 3 Definitions 4 General 5 Disturbance limit and measurement 6 Immunity performance and measurement Annex A (Informative) Test report Annex B (Normative) Transient voltage emission testing instruments and apparatus Annex C (Normative) Radiated disturbance field strength testing instruments and apparatus Annex D (Normative) Testing instrument and equipment for conduction immunity of typical pulse shape Annex E (Normative) Radiated immunity testing instruments and apparatus
1 Scope
This standard specifies electromagnetic compatibility requirements and methods of measurement of audio video apparatus on board
This standard is applicable to audio video apparatus on board for various kind of motor vehicle.
Note: This standard is applicable to audio or video function of multimedia apparatus on board. For equipment that do not have audio and video as their main function (such as GPS navigation system with DVD playing function), they are only available for their audio and video functions.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard, however parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB 3174 Characteristics of PAL-D television broadcasting system
GB/T 4365 Electrotechnical terminology - Electromagnetic compatibility (GB/T 4365-2003, IEC 60050(161): 1990, IDT)
GB/T 6113.1 Specifications for radio disturbance and immunity measuring apparatus
GB/T 9383 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
GB 13837 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (GB 13837-2003, IEC/CISPR 13:2001,MOD)
GB/T 19951 Road vehicles - Test methods for electrical disturbances from electrostatic discharge (GB/T 19951 - 2005,ISO 10605:2001,IDT)
GB/T 21437.2 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only (GB/T 21437.2 2008, ISO 7637-2:2004,IDT)
ISO 11452-2 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
3 Definitions
For the purpose of this standard, the terms and definitions specified in GB/T 4365 and GB 13837 apply.
4 General
4.1 General requirements of measurement
Each audio and video function of a multifunction device shall be tested.
Note: It is recommended that, as each function is tested, attention shall be paid to the effect that certain sensitive ancillary apparatus may have on the test results.
Contents of GB/T 22630-2008
Foreword i
1 Scope
2 Normative references
3 Definitions
4 General
5 Disturbance limit and measurement
6 Immunity performance and measurement
Annex A (Informative) Test report
Annex B (Normative) Transient voltage emission testing instruments and apparatus
Annex C (Normative) Radiated disturbance field strength testing instruments and apparatus
Annex D (Normative) Testing instrument and equipment for conduction immunity of typical pulse shape
Annex E (Normative) Radiated immunity testing instruments and apparatus
