1 Scope
This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of polish for automobiles.
This standard is applicable to the production and inspection of polishing wax (hereinafter referred to as wax) which can be used for polishing coated surface of the body of automobile, but does not apply to “wax without water resistance performance”, wax for repair of body coating and polishing agent for coating.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 531 Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters (GB/T 531-1999, idt ISO 7619:1986)
GB/T 699 Quality Carbon Structural Steels
GB/T 4985 Standard Test Method for Needle Penetration of Petroleum Waxes (GB/T 4985-1998, idt ASTM D1321:1995)
GB/T 9724 Chemical Reagent - General Rule for the Determination of pH (GB/T 9724-2007, ISO 6353-1:1982, NEQ)
GB 13042 Packaging Containers - Aerosol Cans (GB 13042-1998, neq DIN 55500)
GB/T 23436-2009 Cleaning Fluids for Automotive Windshield (JIS K 2398:2001, NEQ)
SH/T 0084 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
SH 0164 Petroleum Products - Rules in Packaging, Handling, Delivery and Acceptance
3 Terminology and Definition
Foreword i
1 Scope
2 Normative References
3 Terminology and Definition
4 Classification
5 Technical Requirements and Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Appendix A (Normative) Methods for Preparation of Wax Sample
Appendix B (Normative) Determination Method for Density of Wax
Appendix C (Normative) Determination Method for pH Value of Wax
Appendix D (Normative) Determination Method for Glossiness Augmentation of Wax
Appendix E (Normative) Inspection Method for Stability of Wax
Appendix F (Normative) Inspection Method for Corrosiveness of Wax to Metals
Appendix G (Normative) Inspection Method for Influence of Wax on Rubber
Appendix H (Normative) Inspection Method for Influence of Wax on Automotive Surface Coating
Appendix I (Normative) Inspection Method for Influence of Wax on Plastics
Appendix J (Normative) Determination Method for Spreadability of Wax for Coating
Appendix K (Normative) Determination Method for Erasability of Wax
1 Scope
This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of polish for automobiles.
This standard is applicable to the production and inspection of polishing wax (hereinafter referred to as wax) which can be used for polishing coated surface of the body of automobile, but does not apply to “wax without water resistance performance”, wax for repair of body coating and polishing agent for coating.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 531 Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters (GB/T 531-1999, idt ISO 7619:1986)
GB/T 699 Quality Carbon Structural Steels
GB/T 4985 Standard Test Method for Needle Penetration of Petroleum Waxes (GB/T 4985-1998, idt ASTM D1321:1995)
GB/T 9724 Chemical Reagent - General Rule for the Determination of pH (GB/T 9724-2007, ISO 6353-1:1982, NEQ)
GB 13042 Packaging Containers - Aerosol Cans (GB 13042-1998, neq DIN 55500)
GB/T 23436-2009 Cleaning Fluids for Automotive Windshield (JIS K 2398:2001, NEQ)
SH/T 0084 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
SH 0164 Petroleum Products - Rules in Packaging, Handling, Delivery and Acceptance
3 Terminology and Definition
Contents of GB/T 23437-2009
Foreword i
1 Scope
2 Normative References
3 Terminology and Definition
4 Classification
5 Technical Requirements and Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
Appendix A (Normative) Methods for Preparation of Wax Sample
Appendix B (Normative) Determination Method for Density of Wax
Appendix C (Normative) Determination Method for pH Value of Wax
Appendix D (Normative) Determination Method for Glossiness Augmentation of Wax
Appendix E (Normative) Inspection Method for Stability of Wax
Appendix F (Normative) Inspection Method for Corrosiveness of Wax to Metals
Appendix G (Normative) Inspection Method for Influence of Wax on Rubber
Appendix H (Normative) Inspection Method for Influence of Wax on Automotive Surface Coating
Appendix I (Normative) Inspection Method for Influence of Wax on Plastics
Appendix J (Normative) Determination Method for Spreadability of Wax for Coating
Appendix K (Normative) Determination Method for Erasability of Wax