Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed according to the rules specified in GB/T 1.1-2009.
This standard was proposed by China Building Materials Federation.
This standard is under the jurisdiction of the National Technical Committee on Architecture and Sanitary Ceramics of Standardization Administration of China (SAC/TC 249).
Sanitary Ware - Smart Toilet
1 Scope
This standard specifies the terms and definitions, classification, general requirements, use functions, performance requirements, electrical safety, test methods, inspection rules, marking and identification, instructions for installation and use, packaging, transportation and storage of smart toilet.
This standard is applicable to the smart toilet installed on water supply and drainage pipeline in all kinds of civil or public building with ambient temperature of 0℃ ~ 40℃, relative humidity of less than 95%, and static water pressure of 0.1MPa ~ 0.6MPa.
2 Normative References
The following documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2423.3 Environmental Testing - Part 2: Testing Method - Test Cab: Damp Heat, Steady State
GB/T 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB 4706.1 Household and Similar Electrical Appliances - Safety Part 1: General Requirements
GB 4706.53 Safety of Household and Similar Electrical Appliances - Particular Requirements for Toilets
GB/T 6461-2002 Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests
GB/T 6952-2015 Sanitary Wares
GB/T 9195 Classification and Terms of Building and Sanitary Ceramics
GB/T 10125-2012 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
GB/T 14536.1 Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements
GB/T 23448 Flexible Hose for Sanitary Tapware
GB/T 26730-2011 Sanitary Ware - Gravity Water Flushing Devices and Supports
GB/T 26750 Sanitary Ware - Pressure Assistant Water Flushing Devices
JC/T 694 Packaging for Sanitary Wares
JC/T 764-2008 WC Seats
JC/T 2116-2012 Non-ceramic Sanitary Ware
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 9195 and GB/T 6952-2015, as well as the following apply.
3.1
smart toilet
toilet that is controlled by electromechanical system or program to perform more than one basic intelligent function
3.2
integral smart toilet
smart toilet for which the smart electromechanical control system cannot be used separately with the toilet, and it is referred to as integral toilet
3.3
split smart toilet
cover of smart toilet for which the smart electromechanical control system is separated with the toilet, and the cover may be used after combination, and it is referred to as split toilet
3.4
basic smart functions for smart toilet (sitting WC pan)
most basic movements or abilities of the smart toilet, including the buttock washing function and the women's washing function
3.5
auxiliary smart functions for smart toilet (sitting WC pan)
functions added to improve the health and hygiene performances of smart toilets, including: water temperature adjustment, seat temperature adjustment, mobile washing, nozzle self-washing, seat and cover slowdown, hot air drying, air temperature adjustment, nozzle adjustment and automatic flushing
3.6
extended smart functions for smart toilet (sitting WC pan)
functions added to improve the comfort of smart toilets, including but not limited to the following functions: automatic opening and closing function of the seat and cover, deodorization, massage and washing, flushing force adjustment, remote control, lighting, multimedia, disinfection, memory, APP, and WIFI
3.7
water saving smart toilet
toilet with flushing water consumption not greater than 5.0L, excluding the water consumption of buttock and women's washing
3.8
instantaneous smart toilet
smart toilet that instantly heats the washing water only when in use
3.9
thermal storage smart toilet
smart toilet that heats the washing water in a built-in water tank and stores and maintains the water temperature
4 Classification
4.1 Classified by material
According to the material, the smart toilet can be classified into ceramic smart toilet and non-ceramic smart toilet.
4.2 Classified by flushing water consumption
According to the flushing water consumption, the smart toilet can be classified into common smart toilet and water saving smart toilet.
4.3 Classified by heating method
According to the heating method, the smart toilet can be classified into instantaneous smart toilet, thermal storage smart toilet and mixed type smart toilet.
4.4 Classified by structure
According to the structure, the smart toilet can be classified into integral smart toilet and split smart toilet (cover of smart toilet).
5 General Requirements
5.1 Appearance quality
5.1.1 Ceramic toilet part
The appearance quality of ceramic toilet part shall meet the requirements of 5.1 in GB/T 6952-2015.
5.1.2 Non-ceramic toilet part
5.1.2.1 Surface defects
After installation, the visible surface shall be smooth and flat without scratch, crack, or bump, and shall be free from obvious defects such as ripple, ash contamination, pitted surface, bubble, and impurities.
5.1.2.2 Color difference
There shall be no obvious color difference for a product or accessory product.
5.1.2.3 Gloss
There shall be no obvious gloss difference for a product or accessory product.
5.1.3 Toilet cover
The toilet cover shall meet the following requirements:
a) The identification on operation panel is simple and easy to understand, and the operation position is clear and feels good;
b) The outer surface shall be smooth without scar, crack, damage, etc.;
c) The body contact part shall be free from convex angle, needle-like protrusions, etc.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 General Requirements
6 Use Functions
7 Performance Requirements
8 Electrical Safety
9 Test Methods
10 Inspection Rules
11 Marking and Identification
12 Instructions for Installation and Use
13 Packaging, Transportation and Storage
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed according to the rules specified in GB/T 1.1-2009.
This standard was proposed by China Building Materials Federation.
This standard is under the jurisdiction of the National Technical Committee on Architecture and Sanitary Ceramics of Standardization Administration of China (SAC/TC 249).
Sanitary Ware - Smart Toilet
1 Scope
This standard specifies the terms and definitions, classification, general requirements, use functions, performance requirements, electrical safety, test methods, inspection rules, marking and identification, instructions for installation and use, packaging, transportation and storage of smart toilet.
This standard is applicable to the smart toilet installed on water supply and drainage pipeline in all kinds of civil or public building with ambient temperature of 0℃ ~ 40℃, relative humidity of less than 95%, and static water pressure of 0.1MPa ~ 0.6MPa.
2 Normative References
The following documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2423.3 Environmental Testing - Part 2: Testing Method - Test Cab: Damp Heat, Steady State
GB/T 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB 4706.1 Household and Similar Electrical Appliances - Safety Part 1: General Requirements
GB 4706.53 Safety of Household and Similar Electrical Appliances - Particular Requirements for Toilets
GB/T 6461-2002 Methods for Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests
GB/T 6952-2015 Sanitary Wares
GB/T 9195 Classification and Terms of Building and Sanitary Ceramics
GB/T 10125-2012 Corrosion Tests in Artificial Atmospheres - Salt Spray Tests
GB/T 14536.1 Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements
GB/T 23448 Flexible Hose for Sanitary Tapware
GB/T 26730-2011 Sanitary Ware - Gravity Water Flushing Devices and Supports
GB/T 26750 Sanitary Ware - Pressure Assistant Water Flushing Devices
JC/T 694 Packaging for Sanitary Wares
JC/T 764-2008 WC Seats
JC/T 2116-2012 Non-ceramic Sanitary Ware
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 9195 and GB/T 6952-2015, as well as the following apply.
3.1
smart toilet
toilet that is controlled by electromechanical system or program to perform more than one basic intelligent function
3.2
integral smart toilet
smart toilet for which the smart electromechanical control system cannot be used separately with the toilet, and it is referred to as integral toilet
3.3
split smart toilet
cover of smart toilet for which the smart electromechanical control system is separated with the toilet, and the cover may be used after combination, and it is referred to as split toilet
3.4
basic smart functions for smart toilet (sitting WC pan)
most basic movements or abilities of the smart toilet, including the buttock washing function and the women's washing function
3.5
auxiliary smart functions for smart toilet (sitting WC pan)
functions added to improve the health and hygiene performances of smart toilets, including: water temperature adjustment, seat temperature adjustment, mobile washing, nozzle self-washing, seat and cover slowdown, hot air drying, air temperature adjustment, nozzle adjustment and automatic flushing
3.6
extended smart functions for smart toilet (sitting WC pan)
functions added to improve the comfort of smart toilets, including but not limited to the following functions: automatic opening and closing function of the seat and cover, deodorization, massage and washing, flushing force adjustment, remote control, lighting, multimedia, disinfection, memory, APP, and WIFI
3.7
water saving smart toilet
toilet with flushing water consumption not greater than 5.0L, excluding the water consumption of buttock and women's washing
3.8
instantaneous smart toilet
smart toilet that instantly heats the washing water only when in use
3.9
thermal storage smart toilet
smart toilet that heats the washing water in a built-in water tank and stores and maintains the water temperature
4 Classification
4.1 Classified by material
According to the material, the smart toilet can be classified into ceramic smart toilet and non-ceramic smart toilet.
4.2 Classified by flushing water consumption
According to the flushing water consumption, the smart toilet can be classified into common smart toilet and water saving smart toilet.
4.3 Classified by heating method
According to the heating method, the smart toilet can be classified into instantaneous smart toilet, thermal storage smart toilet and mixed type smart toilet.
4.4 Classified by structure
According to the structure, the smart toilet can be classified into integral smart toilet and split smart toilet (cover of smart toilet).
5 General Requirements
5.1 Appearance quality
5.1.1 Ceramic toilet part
The appearance quality of ceramic toilet part shall meet the requirements of 5.1 in GB/T 6952-2015.
5.1.2 Non-ceramic toilet part
5.1.2.1 Surface defects
After installation, the visible surface shall be smooth and flat without scratch, crack, or bump, and shall be free from obvious defects such as ripple, ash contamination, pitted surface, bubble, and impurities.
5.1.2.2 Color difference
There shall be no obvious color difference for a product or accessory product.
5.1.2.3 Gloss
There shall be no obvious gloss difference for a product or accessory product.
5.1.3 Toilet cover
The toilet cover shall meet the following requirements:
a) The identification on operation panel is simple and easy to understand, and the operation position is clear and feels good;
b) The outer surface shall be smooth without scar, crack, damage, etc.;
c) The body contact part shall be free from convex angle, needle-like protrusions, etc.
Contents of GB/T 34549-2017
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 General Requirements
6 Use Functions
7 Performance Requirements
8 Electrical Safety
9 Test Methods
10 Inspection Rules
11 Marking and Identification
12 Instructions for Installation and Use
13 Packaging, Transportation and Storage
