This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, marking, identification, packaging, transport and storage of non-ceramic sanitary ware.
This standard is applicable to non-ceramic sanitary ware used in buildings and public places.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3768 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
GB 3854 Test method for hardness of fiber reinforced plastics by means of Barcol impressor
GB 6952 Sanitary wares
GB/T 26730 Sanitary ware - Gravity water flushing devices and supports
GB/T 26750 Sanitary ware - Pressure assistant water flushing devices
CJ/T 194 Non-contact water supply device
JC/T 764 Packaging for sanitary wares
JC/T 779 Glass fiber reinforced plastics baths
JC/T 908 Artificial stone
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
non-ceramic sanitary ware
sanitary ware made of materials other than ceramic materials
3.2
sanitary ware of acrylic
non-ceramic sanitary ware made of acrylic sheet and reinforced materials
3.3
sanitary ware of artificial stone
non-ceramic sanitary ware made of unsaturated polyester and/or methyl methacrylate as matrix and other chemical raw materials such as natural mineral materials
4 Classification
4.1 It is classified by purpose into seven categories, namely pedestal pan, urinal, wash basin, bidet, sink, bathtub and shower tray. See Table 1 for the classification.
4.2 It is classified by material into sanitary ware of acrylic and sanitary ware of artificial stone. See Table 1 for the classification.
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Classification 5 Technical requirements 6 Test methods 7 Inspection rules 8 Marking and identification 9 Packaging, transport and storage
Non-ceramic sanitary ware
1 Scope
This standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, marking, identification, packaging, transport and storage of non-ceramic sanitary ware.
This standard is applicable to non-ceramic sanitary ware used in buildings and public places.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3768 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
GB 3854 Test method for hardness of fiber reinforced plastics by means of Barcol impressor
GB 6952 Sanitary wares
GB/T 26730 Sanitary ware - Gravity water flushing devices and supports
GB/T 26750 Sanitary ware - Pressure assistant water flushing devices
CJ/T 194 Non-contact water supply device
JC/T 764 Packaging for sanitary wares
JC/T 779 Glass fiber reinforced plastics baths
JC/T 908 Artificial stone
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
non-ceramic sanitary ware
sanitary ware made of materials other than ceramic materials
3.2
sanitary ware of acrylic
non-ceramic sanitary ware made of acrylic sheet and reinforced materials
3.3
sanitary ware of artificial stone
non-ceramic sanitary ware made of unsaturated polyester and/or methyl methacrylate as matrix and other chemical raw materials such as natural mineral materials
4 Classification
4.1 It is classified by purpose into seven categories, namely pedestal pan, urinal, wash basin, bidet, sink, bathtub and shower tray. See Table 1 for the classification.
4.2 It is classified by material into sanitary ware of acrylic and sanitary ware of artificial stone. See Table 1 for the classification.
Contents of JC/T 2116-2012
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Technical requirements
6 Test methods
7 Inspection rules
8 Marking and identification
9 Packaging, transport and storage
