Detail of GB/T 35789.1-2017

Introduction of GB/T 35789.1-2017

1 Scope This part of GB/T 35789 specifies requirements, test methods, quality assessment procedures as well as marking, packaging, transport and storage of electronic identification of motor vehicle mounted on automobile and based on ultrahigh frequency radio frequency identification technology. This part is applicable to design, production, test and application of electronic identification of motor vehicle mounted on automobile and based on ultrahigh frequency radio frequency identification technology. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 191 Packaging - Pictorial Marking for Handling of Goods GB/T 2423.1 Environmental Testing - Part 2: Test Methods - Tests A: Cold GB/T 2423.2 Environmental Testing - Part 2: Test Methods - Tests B: Dry Heat GB/T 2423.3 Environmental Testing - Part 2: Testing Method - Test Cab: Damp Heat, Steady State GB/T 2423.5 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods Test Ea and Guidance: Shock GB/T 2423.6 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Eb and Guidance: Bump GB/T 2423.10 Environmental Testing for Electric and Electronic Products - Part 2: Tests Methods - Test Fc: Vibration (Sinusoidal) GB/T 2423.17 Environmental Testing for Electric and Electronic Products - Part 2: Test Method - Test Ka: Salt Mist GB/T 2423.24 Environmental Testing - Part 2: Test Methods - Test Sa: Simulated Solar Radiation at Ground Level and Guidance for Solar Radiation Testing GB/T 2792-2014 Measurement of Peel Adhesion Properties for Adhesive Tapes GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection GB/T 4857.5 Packaging - Transport Packages - Vertical Impact Test Method by Dropping GB 11643 Citizen Identification Number GB/T 14619 Alumina Ceramic Substrates for Thick Film Integrated Circuits GB/T 19951-2005 The Safety Constructional Requirements for Double-deck Large Passenger Vehicles GB/T 26125 Electrical and Electronic Products - Determination of Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers) GB/T 26572 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products GB/T 29768-2013 Information Technology - Radio Frequency Identification - Air Interface Protocol at 800/900 MHz GB/T 35102-2017 Information Technology - Radio Frequency Identification - Compliance Test Method for Air Interface at 800/900 MHz GB/T 35786 General Specification for Read-Write Equipment of Electronic Identification of Motor Vehicle GB/T 35790.1 Specification for Installation of the Electronic Identification of Motor Vehicles - Part1: Automobile

Contents of GB/T 35789.1-2017

Foreword i 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements 4.1 Basic Requirements 4.2 Physical Characteristics 4.3 Environmental Adaptation 4.4 Immunity to Electrostatic Discharge 4.5 Limit Requirements of Restricted Substance 5 Test Method 5.1 Test Conditions 5.2 Test Environment Configuration 5.3 Test Item 6 Quality Assessment Procedures 6.1 Inspection Classification 6.2 Stereotype Inspection 6.3 Delivery Inspection 6.4 Routine Inspection 7 Marking, Packaging, Transport and Storage 7.1 Marking 7.2 Packaging 7.3 Transport 7.4 Storage Annex A (Normative) Coding Method for Motor Vehicle Registration Information Annex B (Normative) Appearance and Structure Annex C (Informative) Dismantlement-for-Reuse Prevention Design