GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal) (English Version)
1 Scope
This part gives a method of test which provides a standard procedure to determine the ability of components, equipment and other articles (hereinafter referred to as specimens), to withstand specified severities of sinusoidal vibration.
The purpose of this test is to determine any mechanical weakness and/or degradation in the specified performance of specimens and to use this information, in conjunction with the relevant specification, to decide the acceptability of the specimens. In some cases, the test method may also be used to demonstrate the mechanical robustness of specimens and/or to study their dynamic behaviour. Categorization of components can also be made on the basis of a selection from within the severities quoted in the test.
2 Normative References
The following standards contain provisions which, through reference in this part of GB/T 2423, constitute provisions of this part. For dated reference, subsequent modification to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this Part.
Contents
Foreword I
Introduction I
1 Scope
2 Normative References
3 Terms and Definitions
4 Testing Equipment
5 Severities
6 Pre-conditioning
7 Initial Measurements
8 Testing
9 Intermediate Measurements
10 Recovery
11 Final Measurements
12 Information to Be Given in the Relevant Specification
Annex A (Informative) Guide to Test Fc
Annex B (Informative) Examples of Severities Primarily Intended for Components
Annex C (Informative) Examples of Severities Primarily Intended for Equipment
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal) (English Version)
Standard No.
GB/T 2423.10-2008
Status
superseded
Language
English
File Format
PDF
Word Count
12000 words
Price(USD)
130.0
Implemented on
2008-10-1
Delivery
via email in 1 business day
Detail of GB/T 2423.10-2008
Standard No.
GB/T 2423.10-2008
English Name
Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal)
1 Scope
This part gives a method of test which provides a standard procedure to determine the ability of components, equipment and other articles (hereinafter referred to as specimens), to withstand specified severities of sinusoidal vibration.
The purpose of this test is to determine any mechanical weakness and/or degradation in the specified performance of specimens and to use this information, in conjunction with the relevant specification, to decide the acceptability of the specimens. In some cases, the test method may also be used to demonstrate the mechanical robustness of specimens and/or to study their dynamic behaviour. Categorization of components can also be made on the basis of a selection from within the severities quoted in the test.
2 Normative References
The following standards contain provisions which, through reference in this part of GB/T 2423, constitute provisions of this part. For dated reference, subsequent modification to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document is applicable to this Part.
Contents of GB/T 2423.10-2008
Contents
Foreword I
Introduction I
1 Scope
2 Normative References
3 Terms and Definitions
4 Testing Equipment
5 Severities
6 Pre-conditioning
7 Initial Measurements
8 Testing
9 Intermediate Measurements
10 Recovery
11 Final Measurements
12 Information to Be Given in the Relevant Specification
Annex A (Informative) Guide to Test Fc
Annex B (Informative) Examples of Severities Primarily Intended for Components
Annex C (Informative) Examples of Severities Primarily Intended for Equipment
