This standard specifies the dimensions, marking and technical requirements of the straight thread connector assembly and body.
This standard is applicable to the pipeline system for hydraulic fluid power and general use, with pipe outside diameter of 4 mm~42 mm and maximum working pressure of 10 MPa~63 MPa.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 19674.2-2005 Connections for General Use and Fluid Power-Ports and Stud Ends with Thread-Stud Ends with Elastomeric Sealing (Type A and Type E)
GB/T 19674.3-2005 Connections for General Use and Fluid Power-Ports and Stud Ends with Thread-Stud Ends With Metal-to-metal Sealing (Type B)(ISO 9974-3: 1996, IDT)
1 Scope
This standard specifies the dimensions, marking and technical requirements of the straight thread connector assembly and body.
This standard is applicable to the pipeline system for hydraulic fluid power and general use, with pipe outside diameter of 4 mm~42 mm and maximum working pressure of 10 MPa~63 MPa.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 3759-2008 24° Cone Connectors - Nut
GB/T 3764-2008 24° Cone Connectors - Ferrule
GB/T 3765-2008 24° Cone Connectors - Specification
GB/T 19674.2-2005 Connections for General Use and Fluid Power-Ports and Stud Ends with Thread-Stud Ends with Elastomeric Sealing (Type A and Type E)
GB/T 19674.3-2005 Connections for General Use and Fluid Power-Ports and Stud Ends with Thread-Stud Ends With Metal-to-metal Sealing (Type B)(ISO 9974-3: 1996, IDT)
3 Dimensions
