GB/T 3880.2-2012 Wrought aluminium and aluminium alloy plates，sheets and strips for general engineering - Part 2: Mechanical properties (English Version)
This part of GB/T 3880 specifies mechanical properties of wrought aluminium and aluminium alloy plates, sheets and strips for general engineering applications.
This part is applicable to wrought aluminium and aluminium alloy plates, sheets and strips (hereafter referred to as “plates, sheets and strips”) for general engineering applications.
2 Mechanical Properties
Tensile testing of plates, sheets and strips at ambient temperature shall be in accordance with those specified in Table 1. During bending properties testing, the bend radius shall be in accordance with those specified in Table 1. Plates, sheets and strips after bending test shall be free from crack on the surface. For the mechanical properties of plates, sheets and strips with a thickness exceed those specified in Table 1, actual measured results shall be accompanied.
GB/T 3880.2-2012 Wrought aluminium and aluminium alloy plates，sheets and strips for general engineering - Part 2: Mechanical properties (English Version)
Standard No.
GB/T 3880.2-2012
Status
superseded
Language
English
File Format
PDF
Word Count
12000 words
Price(USD)
80.0
Implemented on
2013-10-1
Delivery
via email in 1 business day
Detail of GB/T 3880.2-2012
Standard No.
GB/T 3880.2-2012
English Name
Wrought aluminium and aluminium alloy plates，sheets and strips for general engineering - Part 2: Mechanical properties
1 Scope
This part of GB/T 3880 specifies mechanical properties of wrought aluminium and aluminium alloy plates, sheets and strips for general engineering applications.
This part is applicable to wrought aluminium and aluminium alloy plates, sheets and strips (hereafter referred to as “plates, sheets and strips”) for general engineering applications.
2 Mechanical Properties
Tensile testing of plates, sheets and strips at ambient temperature shall be in accordance with those specified in Table 1. During bending properties testing, the bend radius shall be in accordance with those specified in Table 1. Plates, sheets and strips after bending test shall be free from crack on the surface. For the mechanical properties of plates, sheets and strips with a thickness exceed those specified in Table 1, actual measured results shall be accompanied.
... ...
... ...
... ...
