1 Scope
This document specifies the classification, physical and chemical properties of indoor polyvinyl chloride (PVC) foam mats. Test methods and inspection rules.
This document applies to the woven fabric, non-woven fabric, etc. as the substrate, PVC paste resin with plasticizers and other additives as the coating material, in the bottom of the substrate through the coating scraping. Shaping, plasticizing foam, post-processing and other processes made of foam pads, not foam products can also refer to the implementation.
2 normative reference documents
The contents of the following documents constitute the essential provisions of this document through the normative references in the text. Among them, note the date of the reference document, only the date of the corresponding version applies to this document; do not note the date of the reference document, its latest version (including all the revision of the list) applies to this document.
GB/T 2918 plastic specimen condition and test standard environment
GB / T 3920 textile color fastness test friction fastness
GB/T3923.1 Tensile properties of textile fabrics Part 1: Determination of breaking strength and elongation at break (strip method)
GB 6675.4- -2014 toy safety part 4: migration of specific elements
GB/T 17592 textile banned azo dyes determination
GB18586-2001 indoor decoration materials in the polyvinyl chloride coil flooring limit of harmful substances
GB/T22048-2015 toys and children's products in the determination of specific phthalate plasticizers
GB / T 26193 toy materials can be relocated in the determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury, selenium Inductively coupled plasma mass spectrometry
GB/T 28189 Determination of polycyclic aromatic hydrocarbons in textiles
GB/T33345 Determination of short-chain chlorinated paraffins in electrical and electronic products gas chromatography-mass spectrometry
GB/T 34455 paper, paperboard and pulp 2,2-bis(4-hydroxyphenyl) propane (bisphenol A) determination of liquid chromatography
GB/T 34842 Footwear chemical test method Determination of methylamide
QB/T 5115- 2017 Polyethylene foam cushion technical conditions
QB/T 5354 human leather synthetic leather test method for the determination of volatile organic compounds
QB / T 5447 people leather synthetic leather test method determination of odor
3 terms and definitions
This document does not mine to define the terms and definitions.
4 Classification
5Physical and chemical properties
The physical and chemical properties of the product shall conform to the provisions of Table 2.
6 test methods
6.1 Sample cutting
Each batch of products along the longitudinal cut 0.5m as the physical and chemical properties of the test sample, the number should meet the requirements of all physical and chemical properties test in Chapter 5. The sample is prepared by removing the width of 50 mm at each end of the sample in the transverse direction.
6.2 Specimen state conditioning and test environment
Unless otherwise specified, the specimen should be in accordance with the provisions of GB/T2918, the temperature (23 Shi 2) C, relative humidity (50 Shi 10) % of the standard environment for state conditioning, the time should not be less than 4 h, and the test in this environment.
6.3 Tensile load and elongation at break
Test according to the provisions of GB/T3923.1.
6.4 Friction resistance
Test according to the provisions of 5.10 in QB/T 5115-2017.
6.5 Anti-slip property
Test in accordance with the provisions of QB/T 5115- 2017 5.11.
6.6 Color fastness to rubbing
Test according to the provisions of GB/T3920, in which the reciprocal friction 10 times. The worst result of 3 pieces of specimens as the test results.
6.7 Migration elements
Test according to the provisions of GB/T26193. The sample preparation in accordance with the provisions of GB6675.4-2014 8.2.
6.8 decomposable aromatic amine dyes
Test according to the provisions of GB/T 17592.
6.9 polycyclic aromatic hydrocarbons (PAHs) total
Test according to the provisions of GB / T 28189.
6.10 volatile organic compounds
Test according to the provisions of QB/T5354.
6.11 methylamide content
Test according to the provisions of GB / T 34842.
6.12 Vinyl chloride monomer
According to GB18586 - 2001 in the provisions of 5.3 test.
6.13 Total phthalates
GB/T22048-2015 in accordance with the provisions of 8.2.1 method A test.
6.14 Bisphenol A
Test according to the provisions of GB / T 34455.
6.15 Short-chain chlorinated paraffins (SCCP)
Test according to the provisions of GB / T33345. Where the sample preparation according to the provisions of test step 8.
6.16 Odor
Test according to the provisions of test condition 2 in QB/T5447.
7 Inspection rules
7.1 Factory inspection
Items for the serial number 1.2, 10 in Table 2.
7.2 Type test
Project for all the items specified in Table 2.
One of the following circumstances, the type test should be carried out:
a) new products or old products transferred to the production of prototype testing;
b) after mass production, such as materials, processes have changed significantly, which may affect product quality and performance;
c) formal production, regularly or after accumulating a certain amount of production, should be periodic (half a year) for a test;
d) the product is discontinued for more than 6 months, when resuming production;
e) the factory test results and the last - a large difference in the type test.
7.3 Sampling
Each batch of products for the same - - category, the same - - color, the same material, the same specification and the number of products in each batch shall not exceed 10 000 pieces. Randomly selected samples from each batch of products, the total number of samples taken is not less than 0.25m2, the size of a single sample should not be less than 100mmX100mm.
7.4 Judgment Rules
If the test results of all items meet the requirements of the physical and chemical performance indicators specified in this document, the physical and chemical performance of the batch of products is judged to be qualified.
If there are unqualified items, the batch of products should be re-sampled in a double re-test of unqualified items. Double sample retest results if all meet the physical and chemical performance index requirements, the batch of physical and chemical properties of the product is judged to be qualified, otherwise it is judged to be unqualified.
1 Scope
This document specifies the classification, physical and chemical properties of indoor polyvinyl chloride (PVC) foam mats. Test methods and inspection rules.
This document applies to the woven fabric, non-woven fabric, etc. as the substrate, PVC paste resin with plasticizers and other additives as the coating material, in the bottom of the substrate through the coating scraping. Shaping, plasticizing foam, post-processing and other processes made of foam pads, not foam products can also refer to the implementation.
2 normative reference documents
The contents of the following documents constitute the essential provisions of this document through the normative references in the text. Among them, note the date of the reference document, only the date of the corresponding version applies to this document; do not note the date of the reference document, its latest version (including all the revision of the list) applies to this document.
GB/T 2918 plastic specimen condition and test standard environment
GB / T 3920 textile color fastness test friction fastness
GB/T3923.1 Tensile properties of textile fabrics Part 1: Determination of breaking strength and elongation at break (strip method)
GB 6675.4- -2014 toy safety part 4: migration of specific elements
GB/T 17592 textile banned azo dyes determination
GB18586-2001 indoor decoration materials in the polyvinyl chloride coil flooring limit of harmful substances
GB/T22048-2015 toys and children's products in the determination of specific phthalate plasticizers
GB / T 26193 toy materials can be relocated in the determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury, selenium Inductively coupled plasma mass spectrometry
GB/T 28189 Determination of polycyclic aromatic hydrocarbons in textiles
GB/T33345 Determination of short-chain chlorinated paraffins in electrical and electronic products gas chromatography-mass spectrometry
GB/T 34455 paper, paperboard and pulp 2,2-bis(4-hydroxyphenyl) propane (bisphenol A) determination of liquid chromatography
GB/T 34842 Footwear chemical test method Determination of methylamide
QB/T 5115- 2017 Polyethylene foam cushion technical conditions
QB/T 5354 human leather synthetic leather test method for the determination of volatile organic compounds
QB / T 5447 people leather synthetic leather test method determination of odor
3 terms and definitions
This document does not mine to define the terms and definitions.
4 Classification
5Physical and chemical properties
The physical and chemical properties of the product shall conform to the provisions of Table 2.
6 test methods
6.1 Sample cutting
Each batch of products along the longitudinal cut 0.5m as the physical and chemical properties of the test sample, the number should meet the requirements of all physical and chemical properties test in Chapter 5. The sample is prepared by removing the width of 50 mm at each end of the sample in the transverse direction.
6.2 Specimen state conditioning and test environment
Unless otherwise specified, the specimen should be in accordance with the provisions of GB/T2918, the temperature (23 Shi 2) C, relative humidity (50 Shi 10) % of the standard environment for state conditioning, the time should not be less than 4 h, and the test in this environment.
6.3 Tensile load and elongation at break
Test according to the provisions of GB/T3923.1.
6.4 Friction resistance
Test according to the provisions of 5.10 in QB/T 5115-2017.
6.5 Anti-slip property
Test in accordance with the provisions of QB/T 5115- 2017 5.11.
6.6 Color fastness to rubbing
Test according to the provisions of GB/T3920, in which the reciprocal friction 10 times. The worst result of 3 pieces of specimens as the test results.
6.7 Migration elements
Test according to the provisions of GB/T26193. The sample preparation in accordance with the provisions of GB6675.4-2014 8.2.
6.8 decomposable aromatic amine dyes
Test according to the provisions of GB/T 17592.
6.9 polycyclic aromatic hydrocarbons (PAHs) total
Test according to the provisions of GB / T 28189.
6.10 volatile organic compounds
Test according to the provisions of QB/T5354.
6.11 methylamide content
Test according to the provisions of GB / T 34842.
6.12 Vinyl chloride monomer
According to GB18586 - 2001 in the provisions of 5.3 test.
6.13 Total phthalates
GB/T22048-2015 in accordance with the provisions of 8.2.1 method A test.
6.14 Bisphenol A
Test according to the provisions of GB / T 34455.
6.15 Short-chain chlorinated paraffins (SCCP)
Test according to the provisions of GB / T33345. Where the sample preparation according to the provisions of test step 8.
6.16 Odor
Test according to the provisions of test condition 2 in QB/T5447.
7 Inspection rules
7.1 Factory inspection
Items for the serial number 1.2, 10 in Table 2.
7.2 Type test
Project for all the items specified in Table 2.
One of the following circumstances, the type test should be carried out:
a) new products or old products transferred to the production of prototype testing;
b) after mass production, such as materials, processes have changed significantly, which may affect product quality and performance;
c) formal production, regularly or after accumulating a certain amount of production, should be periodic (half a year) for a test;
d) the product is discontinued for more than 6 months, when resuming production;
e) the factory test results and the last - a large difference in the type test.
7.3 Sampling
Each batch of products for the same - - category, the same - - color, the same material, the same specification and the number of products in each batch shall not exceed 10 000 pieces. Randomly selected samples from each batch of products, the total number of samples taken is not less than 0.25m2, the size of a single sample should not be less than 100mmX100mm.
7.4 Judgment Rules
If the test results of all items meet the requirements of the physical and chemical performance indicators specified in this document, the physical and chemical performance of the batch of products is judged to be qualified.
If there are unqualified items, the batch of products should be re-sampled in a double re-test of unqualified items. Double sample retest results if all meet the physical and chemical performance index requirements, the batch of physical and chemical properties of the product is judged to be qualified, otherwise it is judged to be unqualified.