Cotton and polyester blended grey fabric
1 Scope
This document specifies the classification and labeling, requirements, inspection rules, marking, packaging, transportation and storage of Cotton and polyester blended grey fabric and describes corresponding test and inspection methods.
This document is applicable to cotton and polyester blended grey fabric woven from combed cotton or carded cotton and polyester blended yarns.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2910.11 Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibers (method using sulfuric acid)
GB/T 3923.1 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
GB/T 4666 Textiles - Fabrics - Commissioning of width and length
GB/T 4668 Textiles - Woven fabrics - Determination of number of threads per unit length
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 17759 Inspection method for grey fabric surface defects
GB/T 43831 Inspection, marking and packing for grey woven fabric of cotton, man-made fibres and blends
FZ/T 10006 Inspection method for the percentage of nep and trash detect squares of grey fabric
FZ/T 10025 Technical requirement specifications for grey fabric
FZ/T 10026 Testing method for drying mass without size per unit area of grey fabric
3 Terms and definitions
No terms and definitions are listed in this document.
4 Classification and labeling
The varieties, specifications, classification and marking of cotton and polyester blended grey fabric shall comply with FZ/T 10025 and GB/T 43831 according to the needs of users.
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and labeling
5 Requirements
6 Methods for test and inspection
7 Inspection rules, marking and packaging
8 Transportation and storage
9 Others
Cotton and polyester blended grey fabric
1 Scope
This document specifies the classification and labeling, requirements, inspection rules, marking, packaging, transportation and storage of Cotton and polyester blended grey fabric and describes corresponding test and inspection methods.
This document is applicable to cotton and polyester blended grey fabric woven from combed cotton or carded cotton and polyester blended yarns.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2910.11 Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibers (method using sulfuric acid)
GB/T 3923.1 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
GB/T 4666 Textiles - Fabrics - Commissioning of width and length
GB/T 4668 Textiles - Woven fabrics - Determination of number of threads per unit length
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB/T 17759 Inspection method for grey fabric surface defects
GB/T 43831 Inspection, marking and packing for grey woven fabric of cotton, man-made fibres and blends
FZ/T 10006 Inspection method for the percentage of nep and trash detect squares of grey fabric
FZ/T 10025 Technical requirement specifications for grey fabric
FZ/T 10026 Testing method for drying mass without size per unit area of grey fabric
3 Terms and definitions
No terms and definitions are listed in this document.
4 Classification and labeling
The varieties, specifications, classification and marking of cotton and polyester blended grey fabric shall comply with FZ/T 10025 and GB/T 43831 according to the needs of users.
Contents of GB/T 5325-2024
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and labeling
5 Requirements
6 Methods for test and inspection
7 Inspection rules, marking and packaging
8 Transportation and storage
9 Others