This standard specifies the testing method of boiling water shrinkage and heated dry air shrinkage for man-made filament yarn like polyester (polyester fiber), polyamide (chinlon), polypropylene (polypropylene fiber) and cellulose fiber: skein method and single method. Manual
measurement method and instrument measurement method are provided in skein method and where there is a disagreement, manual measurement method is adopted and if this method is not applicable, the appropriate testing method shall be determined through the consultation among
relevant parties.
This standard is applicable to the man-made filament yarn with linear density less than 3000dtex.
This standard is not applicable to pre-oriented yarn.
Foreword
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Device and Material
6 General Principles for Testing
7 Testing Procedure
8 Result Calculation
9 Testing Report
Appendix A (Informative) Rapid Conditioning Time
Appendix B (Informative) Calculation Method for Pre-tension
Appendix C (Informative) Determination of Skein Cylinder Number in Fixed Pre-tension
Appendix D (Normative) Statistics: Terms and Calculation
This standard specifies the testing method of boiling water shrinkage and heated dry air shrinkage for man-made filament yarn like polyester (polyester fiber), polyamide (chinlon), polypropylene (polypropylene fiber) and cellulose fiber: skein method and single method. Manual
measurement method and instrument measurement method are provided in skein method and where there is a disagreement, manual measurement method is adopted and if this method is not applicable, the appropriate testing method shall be determined through the consultation among
relevant parties.
This standard is applicable to the man-made filament yarn with linear density less than 3000dtex.
This standard is not applicable to pre-oriented yarn.
Contents of GB/T 6505-2008
Foreword
1 Scope
2 Normative References
3 Terms and Definitions
4 Principle
5 Device and Material
6 General Principles for Testing
7 Testing Procedure
8 Result Calculation
9 Testing Report
Appendix A (Informative) Rapid Conditioning Time
Appendix B (Informative) Calculation Method for Pre-tension
Appendix C (Informative) Determination of Skein Cylinder Number in Fixed Pre-tension
Appendix D (Normative) Statistics: Terms and Calculation