This part of GB/T 7165 defines acceptable forms of such monitoring, provides some general guidance as to the possible range of measurement and capability of such equipment as may be envisaged, and indicates when and where its uses may be practicable.
This standard is applicable to equipment for continuous monitoring of radioactivity in gaseous effluents during normal operations and during anticipated operational occurrences. This standard does not apply to equipment specifically for use in accident conditions. Such equipment may require additional capabilities.
This standard is restricted to equipment for continuously monitoring radioactivity in gaseous effluent. It does not deal with sample extraction and laboratory analysis.
The object of this standard is to lay down mandatory general requirements and give examples of acceptable methods for equipment for continuous monitoring of radioactivity in gaseous effluents.
It specifies, for the equipment described above, the general characteristics, general test procedures, radiation, electrical, safety and environmental characteristics and the identification and certification of the equipment. If this equipment is part of a centralized system for continuous radiation monitoring in a nuclear facility, there may be additional requirements from other standards related to those systems.
Foreword I
1 Scope
2 Normative References
3 Terms, Definitions and Units
4 Symbols and Abbreviations
5 General Requirements
6 Types of Monitors
7 Sampling of the Effluent
8 Collection of Activity
9 Measurement and Indication Characteristics
10 Reliability
11 Flow-rate Characteristic of Effluent Sampling
12 Alarms
13 Indication Facilities
14 Facilities for Operational Testing
15 Adjustment and Maintenance Facilities
16 Detection Assembly or Sampling and Detection Assembly
17 Control and Measurement Assembly
18 Ambient Background Shielding or Compensation Devices
19 Acoustic Noise Level of Equipment
20 Electromagnetic Interference
21 Power Supply
22 General Test Procedures
23 Tests Performed under Standard Test Conditions
24 Tests Performed with Variation of Influence Quantities
25 Statistical Fluctuations
26 Performance Characteristics
27 Electrical and Mechanical Characteristics
28 Environmental Performance Characteristics
29 Tests of the Air Circuit
30 Type Test Report and Certificate
31 Operation and Maintenance Manual
References
This part of GB/T 7165 defines acceptable forms of such monitoring, provides some general guidance as to the possible range of measurement and capability of such equipment as may be envisaged, and indicates when and where its uses may be practicable.
This standard is applicable to equipment for continuous monitoring of radioactivity in gaseous effluents during normal operations and during anticipated operational occurrences. This standard does not apply to equipment specifically for use in accident conditions. Such equipment may require additional capabilities.
This standard is restricted to equipment for continuously monitoring radioactivity in gaseous effluent. It does not deal with sample extraction and laboratory analysis.
The object of this standard is to lay down mandatory general requirements and give examples of acceptable methods for equipment for continuous monitoring of radioactivity in gaseous effluents.
It specifies, for the equipment described above, the general characteristics, general test procedures, radiation, electrical, safety and environmental characteristics and the identification and certification of the equipment. If this equipment is part of a centralized system for continuous radiation monitoring in a nuclear facility, there may be additional requirements from other standards related to those systems.
Contents of GB/T 7165.1-2005
Foreword I
1 Scope
2 Normative References
3 Terms, Definitions and Units
4 Symbols and Abbreviations
5 General Requirements
6 Types of Monitors
7 Sampling of the Effluent
8 Collection of Activity
9 Measurement and Indication Characteristics
10 Reliability
11 Flow-rate Characteristic of Effluent Sampling
12 Alarms
13 Indication Facilities
14 Facilities for Operational Testing
15 Adjustment and Maintenance Facilities
16 Detection Assembly or Sampling and Detection Assembly
17 Control and Measurement Assembly
18 Ambient Background Shielding or Compensation Devices
19 Acoustic Noise Level of Equipment
20 Electromagnetic Interference
21 Power Supply
22 General Test Procedures
23 Tests Performed under Standard Test Conditions
24 Tests Performed with Variation of Influence Quantities
25 Statistical Fluctuations
26 Performance Characteristics
27 Electrical and Mechanical Characteristics
28 Environmental Performance Characteristics
29 Tests of the Air Circuit
30 Type Test Report and Certificate
31 Operation and Maintenance Manual
References