This part specifies terms and definitions involved in product classification, and method of processing and treatment of aluminium and aluminium alloies.
This part is applicable to aluminium and aluminium alloy products.
1 Scope
2 Aluminium and Aluminium Alloys
2.1 Aluminium
2.2 Alloy
2.3 Alloying element
2.4 Impurity
2.5 Aluminium alloy
2.6 Master alloy
3 Wrought Aluminium Alloy
3.1 Wrought alloy
3.2 Wrought aluminium alloy
3.3 Wrought aluminium copper alloy series
3.4 Wrought aluminium manganese alloy series
3.5 Wrought aluminium silicon alloy series
3.6 Wrought aluminium magnesium alloy series
3.7 Wrought aluminium magnesium-silicon alloy series
3.8 Wrought aluminium zinc alloy series
3.9 Wrought aluminium alloy other series
3.10 Heat-treatable alloy
3.11 Non-heat-treatable alloy
3.12 Free machining alloy
3.13 Self-quenching alloy
4 Aluminium Casting Alloy
4.1 Casting alloy
4.2 Aluminium casting alloy
4.3 Casting aluminium copper alloy series
4.4 Casting aluminium silicon-copper-magnesium alloy series
4.5 Casting aluminium silicon alloy series
4.6 Casting aluminium magnesium alloy series
4.7 Casting aluminium zinc alloy series
4.8 Casting aluminium titanium alloy series
4.9 Casting aluminium alloy other series
5 Unwrought Products
5.1 Unwrought products
5.2 Primary aluminium ingot
5.3 Refined aluminium ingot
5.4 Ingot for remelting
5.5 Secondary aluminium ingot
5.6 Ingot for casting
5.7 Ingot for rolling
5.8 Ingot for extruding
5.9 Ingot for forging
5.10 Casting
5.11 Sand casting
5.12 Permanent mould casting
5.13 Die-casting
5.14 Casting bar / rod; casting wire
5.15 Casting strip
6 Wrought Products
6.1 Wrought product
6.2 Casting-rolled strip
6.3 Concatenation casting-rolled strip
6.4 Concatenation casting-rolled wire
6.5 Rod / bar
6.6 Wire
6.6.1 Wire
6.6.2 Drawing stock
6.7 Tube
6.7.1 Tube
6.7.2 Seamless Tubes
6.7.3 Seam Tubes (or Porthole Tubes)
6.7.4 Weld Tubes
6.8 Profile
6.8.1 Profile
6.8.2 Hollow Profile
6.8.3 Solid Profile
6.8.4 Precision Profile
6.9 Sheet and Plate
6.9.1 Sheet and Plate
6.9.2 Sheet
6.9.3 Plate
6.9.4 Parent Plate/Sheet
6.9.5 Hot Rolled Sheet and Plate
6.9.6 Rolled Slab
6.9.7 Cold Rolled Sheet and Plate
6.9.8 Clad Sheet/Clad Plate
6.9.9 Crazing Sheet
6.9.10 Corrugated Sheet
6.9.11 Convex-concave Sheet
6.9.12 Patterned Sheet
6.9.13 Raised Sheet/Plate
6.10 Strip
6.10.1 Strip
6.10.2 Hot rolled strip
6.10.3 Cold rolled strip
6.10.4 Brazing strip
6.10.5 Parent strip
6.10.6 Reroll stock
6.10.7 Foil stock
6.11 Foil
6.11.1 Foil
6.11.2 Nothing zero foil
6.11.3 One-zero foil
6.11.4 Two-zero foil
6.12 Forging
6.12.1 Forging stock
6.12.2 Die forging product
6.12.3 Hand forging product
6.13 Blank
6.14 Circle
6.15 Slug
7 Working process
7.1 Casting
7.2 Sand casting
7.3 Permanent mould casting
7.4 Pressure die casting
7.5 High pressure die casting
7.6 Low pressure die casting
7.7 Investment casting
7.8 Continuous casting
7.9 Semicontinuous casting
7.10 Forming
7.11 Working
7.13 Cold working
7.14 Strain hardening
7.15 Drawing
7.16 Stretching
7.17 Controlled stretching
7.18 Stress relieving (mechanical)
7.19 Permanent set
7.20 Double rolling
7.21 Flattening; leveling
7.22 Milling
7.23 Roller leveling
7.24 Roller straightening
7.25 Skin pass
7.26 Slitting
7.27 Tension leveling
7.28 Trimming
7.29 Shearing, sawing
7.30 Blanking (closed cut)
7.31 Extrusion
7.32 Direct extrusion
7.33 Indirect extrusion
7.34 Extrusion ratio
7.35 Extrusion effect
7.36 Extrusion seam
7.37 Reeling (of wire)
7.38 Shaving
8 Heat Treatment
8.1 Temper
8.2 Preheating
8.3 Homogenizing
8.4 Annealing
8.5 Flash annealing
8•6 Softening annealing
8.7 Precipitation annealing
8.8 Re-crystallization annealing
8.9 Super annealing
8.10 Partial annealing
8.11 Quenching
8.12 Air quenching
8.13 On hot line quenching
8.14 Quenching stress
8.15 Transfer period quenching
8.16 Critical quenching cooling rate
8.17 Solution heat treatment
8.18 Aging
8.19 Pre-aging treatment
8.20 Age hardening
8.21 Age softening
8.22 Natural ageing
8.23 Artificial aging
8.24 Delayed aging
8.25 Peak aging
8.26 Under-aging
8.27 Over-aging
8.28 Step aging treatment
8.29 Precipitation treatment
8.30 Desensitization treatment
8.31 Stabilizing
8.32 Stress relieving thermal
Annex A (Informative)
Annex B (Informative)
English Alphabetical Index
This part specifies terms and definitions involved in product classification, and method of processing and treatment of aluminium and aluminium alloies.
This part is applicable to aluminium and aluminium alloy products.
Contents of GB/T 8005.1-2008
1 Scope
2 Aluminium and Aluminium Alloys
2.1 Aluminium
2.2 Alloy
2.3 Alloying element
2.4 Impurity
2.5 Aluminium alloy
2.6 Master alloy
3 Wrought Aluminium Alloy
3.1 Wrought alloy
3.2 Wrought aluminium alloy
3.3 Wrought aluminium copper alloy series
3.4 Wrought aluminium manganese alloy series
3.5 Wrought aluminium silicon alloy series
3.6 Wrought aluminium magnesium alloy series
3.7 Wrought aluminium magnesium-silicon alloy series
3.8 Wrought aluminium zinc alloy series
3.9 Wrought aluminium alloy other series
3.10 Heat-treatable alloy
3.11 Non-heat-treatable alloy
3.12 Free machining alloy
3.13 Self-quenching alloy
4 Aluminium Casting Alloy
4.1 Casting alloy
4.2 Aluminium casting alloy
4.3 Casting aluminium copper alloy series
4.4 Casting aluminium silicon-copper-magnesium alloy series
4.5 Casting aluminium silicon alloy series
4.6 Casting aluminium magnesium alloy series
4.7 Casting aluminium zinc alloy series
4.8 Casting aluminium titanium alloy series
4.9 Casting aluminium alloy other series
5 Unwrought Products
5.1 Unwrought products
5.2 Primary aluminium ingot
5.3 Refined aluminium ingot
5.4 Ingot for remelting
5.5 Secondary aluminium ingot
5.6 Ingot for casting
5.7 Ingot for rolling
5.8 Ingot for extruding
5.9 Ingot for forging
5.10 Casting
5.11 Sand casting
5.12 Permanent mould casting
5.13 Die-casting
5.14 Casting bar / rod; casting wire
5.15 Casting strip
6 Wrought Products
6.1 Wrought product
6.2 Casting-rolled strip
6.3 Concatenation casting-rolled strip
6.4 Concatenation casting-rolled wire
6.5 Rod / bar
6.6 Wire
6.6.1 Wire
6.6.2 Drawing stock
6.7 Tube
6.7.1 Tube
6.7.2 Seamless Tubes
6.7.3 Seam Tubes (or Porthole Tubes)
6.7.4 Weld Tubes
6.8 Profile
6.8.1 Profile
6.8.2 Hollow Profile
6.8.3 Solid Profile
6.8.4 Precision Profile
6.9 Sheet and Plate
6.9.1 Sheet and Plate
6.9.2 Sheet
6.9.3 Plate
6.9.4 Parent Plate/Sheet
6.9.5 Hot Rolled Sheet and Plate
6.9.6 Rolled Slab
6.9.7 Cold Rolled Sheet and Plate
6.9.8 Clad Sheet/Clad Plate
6.9.9 Crazing Sheet
6.9.10 Corrugated Sheet
6.9.11 Convex-concave Sheet
6.9.12 Patterned Sheet
6.9.13 Raised Sheet/Plate
6.10 Strip
6.10.1 Strip
6.10.2 Hot rolled strip
6.10.3 Cold rolled strip
6.10.4 Brazing strip
6.10.5 Parent strip
6.10.6 Reroll stock
6.10.7 Foil stock
6.11 Foil
6.11.1 Foil
6.11.2 Nothing zero foil
6.11.3 One-zero foil
6.11.4 Two-zero foil
6.12 Forging
6.12.1 Forging stock
6.12.2 Die forging product
6.12.3 Hand forging product
6.13 Blank
6.14 Circle
6.15 Slug
7 Working process
7.1 Casting
7.2 Sand casting
7.3 Permanent mould casting
7.4 Pressure die casting
7.5 High pressure die casting
7.6 Low pressure die casting
7.7 Investment casting
7.8 Continuous casting
7.9 Semicontinuous casting
7.10 Forming
7.11 Working
7.13 Cold working
7.14 Strain hardening
7.15 Drawing
7.16 Stretching
7.17 Controlled stretching
7.18 Stress relieving (mechanical)
7.19 Permanent set
7.20 Double rolling
7.21 Flattening; leveling
7.22 Milling
7.23 Roller leveling
7.24 Roller straightening
7.25 Skin pass
7.26 Slitting
7.27 Tension leveling
7.28 Trimming
7.29 Shearing, sawing
7.30 Blanking (closed cut)
7.31 Extrusion
7.32 Direct extrusion
7.33 Indirect extrusion
7.34 Extrusion ratio
7.35 Extrusion effect
7.36 Extrusion seam
7.37 Reeling (of wire)
7.38 Shaving
8 Heat Treatment
8.1 Temper
8.2 Preheating
8.3 Homogenizing
8.4 Annealing
8.5 Flash annealing
8•6 Softening annealing
8.7 Precipitation annealing
8.8 Re-crystallization annealing
8.9 Super annealing
8.10 Partial annealing
8.11 Quenching
8.12 Air quenching
8.13 On hot line quenching
8.14 Quenching stress
8.15 Transfer period quenching
8.16 Critical quenching cooling rate
8.17 Solution heat treatment
8.18 Aging
8.19 Pre-aging treatment
8.20 Age hardening
8.21 Age softening
8.22 Natural ageing
8.23 Artificial aging
8.24 Delayed aging
8.25 Peak aging
8.26 Under-aging
8.27 Over-aging
8.28 Step aging treatment
8.29 Precipitation treatment
8.30 Desensitization treatment
8.31 Stabilizing
8.32 Stress relieving thermal
Annex A (Informative)
Annex B (Informative)
English Alphabetical Index
