1 Scope
This Part of GB/T 9160 specifies designation method, boundary dimension, requirements, inspection rules and measuring methods for locknuts and locking devices for tapered sleeves and for threaded shafts. The sleeves are manufactured in accordance with GB/T 9160.1.
This Part is applicable to tapered sleeves and threaded shafts for locknuts and locking devices.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 9160. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 192-2003 General Purpose Metric Screw Threads — Basic Profile (ISO 68-1:1998, ISO General Purpose Metric Screw Threads — Basic profile — Part 1: Metric Screw Threads, MOD)
GB/T 196-2003 General Purpose Metric Screw Threads — Basic Dimensions (ISO 724:1993, ISO General Purpose Metric Screw Threads — Basic Dimensions, MOD)
GB/T 272-1993 Rolling Bearing — Identification Code
GB/T 699-1999 Quality Carbon Structural Steels
GB/T 1804-2000 General Tolerances — Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (eqv ISO 2768-1:1989)
GB/T 2516-2003 General Purpose Metric Screw Threads - Limit Deviations (ISO 965-3:1998, MOD)
GB/T 5796.1-2005 Trapezoidal Screw Threads — Part 1: Profiles (ISO 2901:1993, ISO Metric Trapezoidal Screw Threads — Basic Profile and Maximum Material Profiles, MOD)
GB/T 5796.3-2005 Trapezoidal Screw Threads — Part 3: Basic Dimensions (ISO 2904:1977, ISO Metric Trapezoidal Screw Threads — Basic Dimensions, MOD)
GB/T 5796.4-2005 Trapezoidal Screw Threads — Part 4: Tolerances (ISO 2903:1993, ISO Metric Trapezoidal Screw Threads — Tolerances, MOD)
GB/T 6930-2002 Rolling Bearings — Vocabulary (ISO 5593:1997, IDT)
GB/T 8597-2003 Rolling Bearings — Rust Proof Packaging
GB/T 9160.1 Rolling Bearings–Accessories — Tapered Sleeves
JB/T 3574-1997 Rolling Bearings — Marking for Products
JB/T 8921-1999 Rolling Bearings and Commercial Parts — Inspection Rules
3 Terms and Dimensions
1 Scope
This Part of GB/T 9160 specifies designation method, boundary dimension, requirements, inspection rules and measuring methods for locknuts and locking devices for tapered sleeves and for threaded shafts. The sleeves are manufactured in accordance with GB/T 9160.1.
This Part is applicable to tapered sleeves and threaded shafts for locknuts and locking devices.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Part of GB/T 9160. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 192-2003 General Purpose Metric Screw Threads — Basic Profile (ISO 68-1:1998, ISO General Purpose Metric Screw Threads — Basic profile — Part 1: Metric Screw Threads, MOD)
GB/T 196-2003 General Purpose Metric Screw Threads — Basic Dimensions (ISO 724:1993, ISO General Purpose Metric Screw Threads — Basic Dimensions, MOD)
GB/T 272-1993 Rolling Bearing — Identification Code
GB/T 699-1999 Quality Carbon Structural Steels
GB/T 1804-2000 General Tolerances — Tolerances for Linear and Angular Dimensions without Individual Tolerance Indications (eqv ISO 2768-1:1989)
GB/T 2516-2003 General Purpose Metric Screw Threads - Limit Deviations (ISO 965-3:1998, MOD)
GB/T 5796.1-2005 Trapezoidal Screw Threads — Part 1: Profiles (ISO 2901:1993, ISO Metric Trapezoidal Screw Threads — Basic Profile and Maximum Material Profiles, MOD)
GB/T 5796.3-2005 Trapezoidal Screw Threads — Part 3: Basic Dimensions (ISO 2904:1977, ISO Metric Trapezoidal Screw Threads — Basic Dimensions, MOD)
GB/T 5796.4-2005 Trapezoidal Screw Threads — Part 4: Tolerances (ISO 2903:1993, ISO Metric Trapezoidal Screw Threads — Tolerances, MOD)
GB/T 6930-2002 Rolling Bearings — Vocabulary (ISO 5593:1997, IDT)
GB/T 8597-2003 Rolling Bearings — Rust Proof Packaging
GB/T 9160.1 Rolling Bearings–Accessories — Tapered Sleeves
JB/T 3574-1997 Rolling Bearings — Marking for Products
JB/T 8921-1999 Rolling Bearings and Commercial Parts — Inspection Rules
3 Terms and Dimensions
