This Standard specifies the qualification and certification of personnel involved in non-destructive testing (NDT). It is applicable to proficiency in one or more of the following methods:
a) Acoustic emission testing;
b) Eddy current testing;
c) Infrared thermographic testing;
d) Leak testing (hydraulic pressure tests excluded);
e) Magnetic particle testing;
f) Penetrant testing;
g) Radiographic testing;
h) Strain testing;
i) Ultrasonic testing;
j) Visual testing (direct unaided visual tests and visual tests carried out during the application of another NDT method are excluded).
Certification to This Standard provides an attestation of general competence of the NDT operator. It does not represent an authorization to operate, since this remains the responsibility of the employer, and the certified employee may require additional specialized knowledge of parameters such as equipment, NDT procedures, materials and products of the employer. Where required by regulatory requirements and codes, the authorization to operate will be given in writing by the employer in accordance with a quality procedure that defines any employer-required job-specific training and examinations designed to verify the certificate holder’s knowledge of relevant industry codes, standards, NDT procedures, equipment, and acceptance criteria for the tested products.
The system specified by This Standard could also be applicable to other NDT methods, where independent certification programs exist.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Abbreviated Terms
5 Responsibilities
6 Levels of Qualification
7 Eligibility
8 Qualification Examination — Content and Grading
9 Qualification Examination — Conduct
10 Certification
11 Files
12 Introduction of New NDT Methods or Sectors
Appendix A (Informative) Sectors
Appendix B (Normative) Specimen Master Report
Appendix C (Normative) Level 1 and 2 Specimens
Appendix D (Informative) Weighting of Level 1 and 2 Practical Examinations
Appendix E (Informative) Weighting of Level 3 NDT Procedure Examination
Appendix F (Normative) Structured Credit System for Level 3 Recertification
Bibliography
This Standard specifies the qualification and certification of personnel involved in non-destructive testing (NDT). It is applicable to proficiency in one or more of the following methods:
a) Acoustic emission testing;
b) Eddy current testing;
c) Infrared thermographic testing;
d) Leak testing (hydraulic pressure tests excluded);
e) Magnetic particle testing;
f) Penetrant testing;
g) Radiographic testing;
h) Strain testing;
i) Ultrasonic testing;
j) Visual testing (direct unaided visual tests and visual tests carried out during the application of another NDT method are excluded).
Certification to This Standard provides an attestation of general competence of the NDT operator. It does not represent an authorization to operate, since this remains the responsibility of the employer, and the certified employee may require additional specialized knowledge of parameters such as equipment, NDT procedures, materials and products of the employer. Where required by regulatory requirements and codes, the authorization to operate will be given in writing by the employer in accordance with a quality procedure that defines any employer-required job-specific training and examinations designed to verify the certificate holder’s knowledge of relevant industry codes, standards, NDT procedures, equipment, and acceptance criteria for the tested products.
The system specified by This Standard could also be applicable to other NDT methods, where independent certification programs exist.
Contents of GB/T 9445-2008
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Abbreviated Terms
5 Responsibilities
6 Levels of Qualification
7 Eligibility
8 Qualification Examination — Content and Grading
9 Qualification Examination — Conduct
10 Certification
11 Files
12 Introduction of New NDT Methods or Sectors
Appendix A (Informative) Sectors
Appendix B (Normative) Specimen Master Report
Appendix C (Normative) Level 1 and 2 Specimens
Appendix D (Informative) Weighting of Level 1 and 2 Practical Examinations
Appendix E (Informative) Weighting of Level 3 NDT Procedure Examination
Appendix F (Normative) Structured Credit System for Level 3 Recertification
Bibliography