1 Scope
This standard specifies the types, basic parameters, dimensions, technical requirements and relevant service requirements of slip-on-welding plate flange manholes with davit to vertical cover made of carbon steel and stainless steel.
This standard is applicable to slip-on-welding plate flange manholes with davit to vertical cover of which the nominal pressure PN is less than or equal to 0.6MPa, the working temperature and the corresponding maximum non-impact working pressure are limited within the range specified in Table 3-2 according to material category.
2 Normative References
GB/T 41-2000 Hexagon Nuts - Product Grade C
GB/T 95-2002 Plain Washers - Product Grade C
HG 20593-1997 Slip-on-welding Plate Steel Pipe Flanges (European System)
HG 20601-1997 Steel Pipe Blank Flanges (European System)
HG 20606-1997 Nonmetallic Flat Gaskets for Steel Pipe Flanges (European System)
HG 20607-1997 PTFE Envelope Gasket for Steel Pipe Flanges (European System)
HG 20613-1997 Fasteners for Steel Pipe Flanges (European System)
HG/T 21514-2005 Type and Technical Specifications of Steel Manhole and Handhole
3 Types, Basic Parameters and Dimensions
1 Scope
This standard specifies the types, basic parameters, dimensions, technical requirements and relevant service requirements of slip-on-welding plate flange manholes with davit to vertical cover made of carbon steel and stainless steel.
This standard is applicable to slip-on-welding plate flange manholes with davit to vertical cover of which the nominal pressure PN is less than or equal to 0.6MPa, the working temperature and the corresponding maximum non-impact working pressure are limited within the range specified in Table 3-2 according to material category.
2 Normative References
GB/T 41-2000 Hexagon Nuts - Product Grade C
GB/T 95-2002 Plain Washers - Product Grade C
HG 20593-1997 Slip-on-welding Plate Steel Pipe Flanges (European System)
HG 20601-1997 Steel Pipe Blank Flanges (European System)
HG 20606-1997 Nonmetallic Flat Gaskets for Steel Pipe Flanges (European System)
HG 20607-1997 PTFE Envelope Gasket for Steel Pipe Flanges (European System)
HG 20613-1997 Fasteners for Steel Pipe Flanges (European System)
HG/T 21514-2005 Type and Technical Specifications of Steel Manhole and Handhole
3 Types, Basic Parameters and Dimensions