1 Scope
This standard specifies the terms, product classification and specification, technical requirements, inspection and test methods, inspection rules as well as marking, packaging, transportation and storage for PSA oxygen and nitrogen plants
This standard is applicable to plants that adopt molecular sieve PSA to separate and produce oxygen or nitrogen from air at normal temperature, with oxygen output not more than 15,000m3/h and nitrogen output not more than 5,000 m3/h.
Note 1: In this standard, the output of oxygen and nitrogen is the gas quantity under the standard state, i.e. that at 0℃, 0.101 325 MPa (absolute pressure), expressed in m3.
Note 2: Pressure values are gauge pressure values unless otherwise indicated.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 150.1~150.4 Pressure vessels
GB/T 2888 Methods of noise measurement for fans blowers compressors and roots blowers
GB/T 3863 Industrial oxygen
GB/T 3864 Industrial nitrogen
GB/T 4830 Industrial process measurement and control instruments - Pressure range and quality of air supply
GB/T 4980 Determination of sound level for noise emitted by displacement compressors
GB/T 12325 Power quality - Deviation of supply voltage
GB 12348 Emission standard for industrial enterprises noise at boundary
GB/T 13306 Plates
GB/T 13384 General specifications for packing of mechanical and electrical product
GB 50016 Code for fire protection design of buildings
GB 50274 Code for construction and acceptance of refrigeration and air separating equipment installation engineering
GB 50275 Code for construction and acceptance of computer, fan and pump installation engineering
JB/T 5902 Technical conditions for oxygen pipelines used in air separation plants
JB/T 6896 Surface cleanliness of air separation plants
JB/T 8058 Active alumina used in air separation plants - Specification for inspecting and accepting
YY/T 0298 General specification for medical oxygen generator with molecular sieve
TSG R0004 Supervision regulation on safety technology for stationary pressure vessel
3 Terms
3.1
pressure swing adsorption (PSA)
the gas separation method of absorption during working medium pressurizing and desorption during working medium depressurizing under isothermal conditions
3.2
oxygen, nitrogen by pressure swing adsorption
separation and production of oxygen or nitrogen from air by PSA
4 Product classification and specification
Classification and specification of the product shall meet those specified in Table 1.
Foreword i
1 Scope
2 Normative references
3 Terms
4 Product classification and specification
5 Technical requirements
6 Inspection and test methods
6.1 Inspection and test methods of final products
6.2 Test condition requirements
6.3 Test instruments and meters
6.4 Measurement methods and results calculation
7 Inspection rules
8 Marking, packaging, transportation and storage
1 Scope
This standard specifies the terms, product classification and specification, technical requirements, inspection and test methods, inspection rules as well as marking, packaging, transportation and storage for PSA oxygen and nitrogen plants
This standard is applicable to plants that adopt molecular sieve PSA to separate and produce oxygen or nitrogen from air at normal temperature, with oxygen output not more than 15,000m3/h and nitrogen output not more than 5,000 m3/h.
Note 1: In this standard, the output of oxygen and nitrogen is the gas quantity under the standard state, i.e. that at 0℃, 0.101 325 MPa (absolute pressure), expressed in m3.
Note 2: Pressure values are gauge pressure values unless otherwise indicated.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 150.1~150.4 Pressure vessels
GB/T 2888 Methods of noise measurement for fans blowers compressors and roots blowers
GB/T 3863 Industrial oxygen
GB/T 3864 Industrial nitrogen
GB/T 4830 Industrial process measurement and control instruments - Pressure range and quality of air supply
GB/T 4980 Determination of sound level for noise emitted by displacement compressors
GB/T 12325 Power quality - Deviation of supply voltage
GB 12348 Emission standard for industrial enterprises noise at boundary
GB/T 13306 Plates
GB/T 13384 General specifications for packing of mechanical and electrical product
GB 50016 Code for fire protection design of buildings
GB 50274 Code for construction and acceptance of refrigeration and air separating equipment installation engineering
GB 50275 Code for construction and acceptance of computer, fan and pump installation engineering
JB/T 5902 Technical conditions for oxygen pipelines used in air separation plants
JB/T 6896 Surface cleanliness of air separation plants
JB/T 8058 Active alumina used in air separation plants - Specification for inspecting and accepting
YY/T 0298 General specification for medical oxygen generator with molecular sieve
TSG R0004 Supervision regulation on safety technology for stationary pressure vessel
3 Terms
3.1
pressure swing adsorption (PSA)
the gas separation method of absorption during working medium pressurizing and desorption during working medium depressurizing under isothermal conditions
3.2
oxygen, nitrogen by pressure swing adsorption
separation and production of oxygen or nitrogen from air by PSA
4 Product classification and specification
Classification and specification of the product shall meet those specified in Table 1.
Contents of JB/T 6427-2015
Foreword i
1 Scope
2 Normative references
3 Terms
4 Product classification and specification
5 Technical requirements
6 Inspection and test methods
6.1 Inspection and test methods of final products
6.2 Test condition requirements
6.3 Test instruments and meters
6.4 Measurement methods and results calculation
7 Inspection rules
8 Marking, packaging, transportation and storage